512550
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
DEPTH 2100 Installation and Operation Manual
NAVMAN
2. When the unit is on, release . The display
will indicate the current display unit with:
8Ft
888
Feet Metres
8FA
Fathoms
3. Use
and to change the value.
4. To exit this mode, press and hold both
and
simultaneously. Alternatively, if no keys are
pressed for a period of 5 seconds normal depth
display will resume.
OFFON
^
V
Press simultaneously
The display will now indicate the current water
depth in the selected display unit.
Multiple Depth 2100 instruments can be installed on
a single vessel. These instruments can be connected
together and configured to operate in a dual station
configuration. One instrument is designated as a
master and all other instruments, connected to it,
are configured as slaves. The master device is
connected to the depth transducer and determines
the water depth. This information is then displayed
on all slave devices connected to it. Slave devices
do not have transducers connected to them.
The slave devices can be configured to operate as
fully functional NMEA repeaters where they display
water depth, as displayed on the master device, and
share common alarm settings and keel offset values.
In this mode the common alarm settings can be
changed or activated/deactivated from either the
master or slave devices.
Alternatively, the slaves can be configured to operate
as independent slaves. In this mode the slaves display
the water depth received from the master, but have
independent alarm settings and keel offset values.
Note: The instrument designated as the
master device is the only instrument connected to
the depth transducer.
3 Dual Station Operation
Master/Slave Selection
To select the master/slave mode of operation:
1. Apply power while holding down
.
OFF
V
Hold down during power up
2. When the unit is on. The display will indicate
the current display unit:
8Ft
example
3. Continue to hold
until the display indicates
the current master/slave selection.
Master Slave
4. Use
and to change the selection.
5. To exit this mode, press and hold both
and
simultaneously. Alternatively, if no keys are
pressed for a period of 5 seconds normal
depth display will resume.
OFFON
^
V
Press simultaneously
Note: If the data link is inadvertently brocken then
the display will alternate between -- and -SL.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Depth 2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Depth 2100 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Depth 2100

Navman Depth 2100 User Manual - German - 10 pages

Navman Depth 2100 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info