512550
7
Zoom out
Zoom in
Previous page
1/12
Next page
7
DEPTH 2100 Installation and Operation Manual
NAVMAN
3. Continue to hold . The
display will indicate the
current master/slave
selection.
4. Continue to hold
until the display indicates
the current linked/separate selection.
Linked Separate
5. Use
and to change the selection.
6. To exit this mode, press and hold both
and
Linked or Separate Selection
By default a dual station pair of Depth 2100
instruments automatically keep the following settings
the same in both instruments:
Alarms On/Off
Alarm Values (Deep and Shallow)
Keel Offset (see note)
Units of measure (see note)
Example: Switching an alarm off on the slave
instrument will also switch the alarm off on the master
instrument. The reverse also applies, alarms
changed on the master will be automatically changed
in the slave instrument.
Note: The keel offset and units of measure should
only be changed on the Master instrument.
If independent settings are required the link feature
can be disabled.
To enable or disable the linked mode:
1. Apply power while holding down
.
OFF
V
2. When the unit is on. The
display will first indicate the
current display unit:
Your depth sounder is designed for years of trouble free operation assuming proper installation and care are
provided. Following the operation and installation guidelines in this manual should ensure optimum
performance of the instrument. In the unlikely event that the instrument shall fail to perform or shall need
servicing, contact the dealer whom you purchased your Depth 2100 from.
4 Maintenance
Hold down during power up
Example
Slave
8Ft
simultaneously. Alternatively, if no keys are
pressed for a period of 5 seconds normal
depth display will commence.
OFFON
^
V
Press simultaneously
Note: This setup procedure applies to the master
device and all slave devices. For separate
operation all devices, including the master, must
be set to Separate mode. Also, for linked operation
all devices, including the master, must be set to
Linked mode.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Depth 2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Depth 2100 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Depth 2100

Navman Depth 2100 User Manual - German - 10 pages

Navman Depth 2100 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info