650499

Maxdata Quantum PX502 Tape Library Manual

10
Zoom out
Zoom in
Previous page
1/14
Next page
PX502 Tape Library Quick Start Guide
10
1 Put on an antistatic wrist strap and clip it to the library
chassis.
2IF there is space above the library to remove the top
cover, remove the twelve PHILLIPS screws securing the
top cover and FlexLink cover to gain further access to
the internal packaging restraints (see figure 17
). If there
is no space above the PX502 library to remove the top
cover, continue with Step 3.
Figure 17 Removing the Top
Cover (Optional Step)
3 When the library powers on for the first time, the OCP
asks you: “Are the internal packaging materials
removed?” (OK or NO).
CAUTION: Take standard ESD precautions when
performing this procedure.
4 Press NO to continue. The system asks you again: “Are
the internal packaging materials removed?” (OK or
NO).
5 Press NO to continue. The OCP displays “Doors opened,
magazines released, pull magazines out before power
shutoff. The library waits approximately 30 seconds for
you to open the doors and remove both magazines
from the library.
6 After the library has powered down, remove the foam
restraints by completing the following steps (see
figure 18
):
a Detach the tie band holding the two sides of the
metal restraints together and remove it from the
library.
b Remove the metal restraints from the library.
c Lift the left foam restraint slightly up and remove it
from the library.
d Slide the right foam restraint to the right until you
are clear of the robotics motor and remove the
restraint from the library.
C
AUTION: Pressing OK when the internal packaging
restraints are in place will damage the library
robotics.
NOTE: If you are unable to remove the magazines before
the library shuts down. Turn on the library power
and repeat the steps above.
C
AUTION: Avoid touching the printed circuit board.
C
AUTION: When removing the foam restraints, ensure
that the robotics umbilical cable is lying
down in the correct position and not across
the robotics track.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata Quantum PX502 Tape Library at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata Quantum PX502 Tape Library in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info