650499

Maxdata Quantum PX502 Tape Library Manual

11
Zoom out
Zoom in
Previous page
1/14
Next page
PX502 Tape Library Quick Start Guide
11
Figure 18 Removing the Foam
Restraints
e Install the tape cartridge magazines.
f Close the front doors.
g If you have removed the top cover for better access,
install the top cover back on the library.
N
OTE: Save the robotics restraints and re-usable tie wrap
for later shipping or relocation of the library.
N
OTE: Refer to the
PX500 Series User’s Guide
(PN 81-
81290) for more information on loading the tape
cartridge magazines.
Tie band
Metal
restraint
Metal
restraint
Foam
restraints
Robotics
umbilical
cable
Setting the Library Options
0
To set the library options:
1 Turn on the library by pushing power button located on
the bottom left-hand corner of the OCP (see figure 16).
2 The OCP asks you: “Are the internal packaging materials
removed?” (OK or NO).
3 Press OK to continue.
4 The OCP asks again: “Are the internal packaging
materials removed?” (OK or NO).
5 Press OK to continue. The library continues the boot
process. When complete, the Home screen displays.
6 Press Setup from the Home screen. The OCP displays
the Setup screen (see figure 19):
Figure 19 Setup Screen
7 From the Setup screen, use the up and down arrows to
highlight Cabinet and press Enter.
The Cabinet screen displays (see figure 20):
Figure 20 Library Options Screen
8 The Stack role screen allows you to configure the
library as a “Master” or “Slave” in a multiple library
stack. The library is configured “Solo” by default. If this
is a multiple library stack, use the up and down arrows
to highlight Stack role and press Enter displays the
following information about the library:
Enter
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata Quantum PX502 Tape Library at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata Quantum PX502 Tape Library in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info