650499
9
Zoom out
Zoom in
Previous page
1/14
Next page
PX502 Tape Library Quick Start Guide
9
Figure 13 PX502 Cable
Configuration (SCSI System
Controller Board)
Figure 14 PX502 Cable
Configuration (Surrogate)
Figure 15 PX502 Cable
Configuration (Native Fibre
Channel)
2 Connect one end of an AC power cable to each
installed power supply and to a wall outlet.
N
OTE: When operating in surrogate mode, the SCSI host
connection must be made to tape drive 1.
Back of Library
SCSI host
Ethernet
Power
SCSI System Controller Board
Tape drive 1Tape drive 2
Back of Library
SCSI hostEthernet
Power
Surrogate System
Controller Board
Tape drive 2 Tape drive 1
Back of Library
Fibre Channel
host/SAN
Ethernet
Power
Tape drive 2 Tape drive 1
Tape Drive Fibre
Channel host ports
Initial Configuration 0
Initially configuring the library consists of the following
steps:
Turning on the Library
Removing the Remaining Packing Materials
Setting the Library Options
Setting the Date and Time
Setting Network Information
Turning on the Library
0
To turn on the library:
1 Verify that:
Power cables are firmly in place
All doors are closed and latched
2 Turn on the library by pushing power button located on
the bottom left-hand corner of the OCP (see figure 16
).
Figure 16 Turning on the Library
The power up sequence can take several minutes. The
first message displaying will be “Are the internal
packaging materials removed?” Continue with
Removing the Remaining Packing Materials
Removing the Remaining Packing Materials
0
Now that you have installed the library chassis and powered
on the system, you MUST remove the remaining packing
materials from the library chassis before the library is
operational.
Power button
OCP
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata Quantum PX502 Tape Library at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata Quantum PX502 Tape Library in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info