Manual Marmitek IR Control Pro System (page 6 of 44) (English, German, Dutch, French, Italian, Spanish)

494340

Zoom out

Zoom in

1/44

2. Plug the required IR Extender Cables (with IR LEDs or an IR Blaster) into the IR

Module via the connection ‘Emitters’ or ‘Emitters/Blasters’.

3. Self-adhesive film is provided with the IR LEDs and IR Blaster. This can be used

to easily affix the IR LEDs or IR Blaster in the correct position.

• Ensure that the IR Extender Cable’s LEDs are stuck precisely onto the A/V

device’s infrared sensor. The exact position can easily be located by shining

a torch on them.

• First test the position and working of the IR LEDs before fixing them per-

manently to the IR window of your A/V equipment.

• If you use only one of the 2 LEDs, then leave the second IR LED unused.

Never remove it from the IR extension cable!

4. Now connect the IR Receiver to the IR Module, check the correct position and

the colours of the wires when doing so.

• Place the supplied IR receiver in such a way that it is visible for your infra-

red remote control and if possible not in the vicinity of potential sources

of disturbance like direct sun light, TL lighting, energy saving lamps etc.

The infrared LED indicator on the IR receiver lights up or flashes when it

receives an infrared signal. Use the LED indicator to place the IR receiver

in the place with the least interference (LED indicator is not activated or

only faintly lights up).

• Because of the supplied self-adhesive strip installation is possible almost

everywhere. Experiment for the correct place before you fix the IR recei-

ver definitively.

• The adhesive strip can cause discoloration on certain surfaces or leave

glue remnants by removal.

5. Connect the power adapter to the ‘POWER’ connector on the IR Module and

plug the adapter into a socket (100-240V 50/60Hz).

See appendix on page 40/41 for more example installations.

4. FREQUENTLY ASKED QUESTIONS

Bad (or no) infrared return signal

• Both the built-in and separate IR Receivers have reception sensitivity of

around 10 metres with an aperture angle of 90 degrees. Range is also depen-

dent on the remote control used. The IR reception indication LED in the IR

Receiver will light up when it receives an IR signal.

• Check whether the power adapter is connected to the IR System Module.

• Ensure that the IR Receiver and the IR Extender Cable are correctly connected

and that these are plugged in properly.

• Try to avoid as many sources of disruption as possible, eg. direct sunlight,

fluorescent lighting, energy-saving bulbs and similar. These may have a nega-

tive impact upon the effectiveness of the system.

• Some IR windows from set-top and satellite boxes are very sensitive and are

easily disrupted. These devices then receive too much infrared light and will

either work badly or not work at all. Relocate the IR LED or IR Blaster so that

less infrared light is received via the IR window.

6 © MARMITEK

IRCP200_UG_80x120 12-01-2010 14:53 Pagina 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IR Control Pro System in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek IR Control Pro System Manual

Product: