494340

Marmitek IR Control Pro System Manual

4
Zoom out
Zoom in
Previous page
1/44
Next page
The IR Control Pro System™ is made up of three main components;
• IR Receiver (1)
The IR Receiver receives infrared commands from your remote control and
sends these onto the IR System Module.
• IR System Module (2)
The IR System Module receives infrared commands from the IR Receiver, pro-
cesses them and sends them onto all connected IR Extender Cables.
• IR Extender Cable with LEDs (3) or an IR Blaster.
The IR Extender Cable receives the infrared commands from the IR System
Module and converts these into infrared signals via the IR LEDs or IR Blasters.
The IR LEDs have a limited range and must, therefore, be stuck very precise-
ly to the IR window on the A/V device to be operated. An IR Blaster emits a
lot more infrared light (up to a distance of two metres) and can, therefore,
operate numerous devices. As a result, the Blaster does not have to be loca-
ted as precisely as the LEDs.
2. CONNECTIONS
The IR System Module is the main component that connects IR Receivers, the
power adapter and IR Extender Cables to one another. All of the IR Module con-
nections are now explained so that you can get the most out of all of the opti-
ons available.
1. SCREW-IN TERMINAL (+12V, GND,
ST OUT, IR IN): A maximum of 3 paral-
lel IR Receivers can be connected to this
input. Ensure that the colours of the
wires always correspond to the appro-
priate connections (see the IR Receiver’s
datasheet).
2. EMITTERS: Two mini jack outputs for
connecting an IR Extender Cable with 1
or 2 LEDs.
3. EMITTERS / BLASTERS: Two mini jack connection points for connecting an
IR Extender Cable with Blaster or an IR Extender Cable with 1 or 2 LEDs.
4. DIP SWITCHES: See explanation of DIP switches below.
5. 12V DC: Power adapter for the IR Module (supplied).
4 © MARMITEK
(1) (2) (3)
IRCP200_UG_80x120 12-01-2010 14:53 Pagina 4
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek IR Control Pro System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IR Control Pro System in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info