Manual Marmitek IR Control Pro System (page 3 of 44) (English, German, Dutch, French, Italian, Spanish)

494340

Zoom out

Zoom in

1/44

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in

dry spaces. Do not expose the components to rain or moisture. Do not use

the product close to a bath, swimming pool etc.

• Do not expose the components of your systems to extremely high tempera-

tures or bright light sources.

• In case of improper usage or if you have altered and repaired the product

yourself, all guarantees expire. Marmitek does not accept responsibility in the

case of improper usage of the product or when the product is used for pur-

poses other than specified. Marmitek does not accept responsibility for addi-

tional damage other than covered by the legal product responsibility.

• This product is not a toy. Keep out of reach of children.

• Do not open the product: the device may contain live parts. The product

should only be repaired or serviced by a qualified expert.

• Only connect the adapter to the mains after checking whether the mains vol-

tage is the same as the values on the identification tags. Never connect an

adapter or power cord when it is damaged. In that case, contact your sup-

plier.

Table of contents

1 . H O W I T W O R K S _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3

2. CONNECTIONS _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4

3 . I N S TA L L AT I O N _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5

4. FREQUENTLY ASKED QUESTIONS_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6

5. TECHNICAL DATA_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7

6 . C O M P O N E N T S A VA I L A B L E _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7

INTRODUCTION

Congratulations on your purchase of the IR System Module 200™. This Module

is the main component of the IR Control Pro System™. With it you can extend

the IR (infrared) signals of remote controls. The IR Control Pro System™ makes it

possible to control A/V devices while these are in a closed cupboard or when your

A/V equipment is out of sight.

The IR Control Pro Sytem™ is a modular infrared extension system and the com-

ponents required are available individually. As a result, this system can be used

universally and is suitable for just about any situation.

1. HOW IT WORKS

Locate your A/V equipment in a closed cupboard, TV cabinet or even in another

room. The IR receiver must be installed in view of your own remote control. Stick

the IR LEDs onto the front panel of your A/V equipment and place the IR main

module out of sight. Point the remote control at the IR receiver in order to send

the appropriate command to the IR LEDs (via the IR main module). These will

then immediately pass this onto the A/V equipment.

3IRCP System Module 200™

ENGLISH

IRCP200_UG_80x120 12-01-2010 14:53 Pagina 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IR Control Pro System in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek IR Control Pro System Manual

Product: