494340

Marmitek IR Control Pro System Manual

8
Zoom out
Zoom in
Previous page
1/44
Next page
If your equipment receives the IR command directly from the remote control and
via IR Control Pro System this may have a detrimental impact on its effectiveness.
If your IR LEDs emit too much infrared it may disrupt the control of your other
devices. Sticking the protective caps over the IR LEDs will resolve both of these
problems.
Art.nr. 08009 - IRCP LED Cover Cap (4 pcs)
IR Blaster
An IR Blaster emits a lot more infrared light (up to a distance of two metres) and
can, therefore, operate numerous devices. As a result, the location of the IR
Blaster in relation to the IR LEDs does not have to be so precise.
Art.nr. 08006 - IRCP blaster LED
See datasheet for the IR Blaster on www.marmitek.com.
Extra remote control
If you want to operate your device from various
places in your home, or if you want to use just one
single remote control for all your A/V devices, then
make your choice from the complete range of
Marmitek universal remote controls. These replace
almost every remote control you are using at the
moment. More information about these so called
universal remote controls can be found at
www.marmitek.com.
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on
the product and/or its packaging must not be disposed of with unsorted municipal
waste. The symbol indicates that this product should be disposed of separately from
regular household waste streams. It is your responsibility to dispose of this and other
electric and electronic equipment via designated collection facilities appointed by the govern-
ment or local authorities. Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. For more detailed information about the
disposal of your old equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
8 © MARMITEK
IRCP200_UG_80x120 12-01-2010 14:53 Pagina 8
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek IR Control Pro System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IR Control Pro System in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info