Manual Makita DUR368A (page 22 of 40) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690568

Zoom out

Zoom in

1/40

22 ENGLISH

Hex wrench storage

CAUTION: Be careful not to leave the hex

wrench inserted in the tool head. It may cause

injuryand/ordamagetothetool.

Whennotinuse,storethehexwrenchasillustratedto

keepitfrombeinglost.

►Fig.17: 1.Hexwrench

Fortheloophandlemodel,thehexwrenchcanalsobe

stored on the handle as illustrated.

►Fig.18: 1.Hexwrench

Correct combination of the cutting

tool and the protector

CAUTION: Always use the correct combi-

nation of cutting tool and the protector. A wrong

combinationmaynotprotectyoufromthecuttingtool,

yingdebris,andstones.Itcanalsoaffectthebal-

anceofthetoolandresultinaninjury.

Cutting tool Protector

Cutter blade

(3-tooth, 4-tooth, and 8-tooth

blades)

Nylon cutting head

Plastic blade

Installing the protector

WARNING: Never use the tool without the

guard illustrated in place.Failuretodosocan

causeseriouspersonalinjury.

NOTE:Thetypeoftheprotectorsuppliedasthestan-

dard accessory varies depending on the countries.

For cutter blade

Attach the protector to the clamp using bolts.

►Fig.19: 1. Clamp 2. Protector

For nylon cutting head / plastic blade

CAUTION: Take care not to injure yourself on

the cutter for cutting the nylon cord.

Attach the protector to the clamp using bolts.

►Fig.20: 1. Clamp 2. Protector 3. Cutter

Installing the cutting tool

CAUTION: Always use the supplied

wrench(es) to remove or to install the cutting tool.

CAUTION: Be sure to remove the hex wrench

inserted into the tool head after installing the

cutting tool.

NOTE:Thetypeofthecuttingtool(s)suppliedasthe

standard accessory varies depending on the coun-

tires.Thecuttingtoolisnotincludedinsomespeci-

cationsofthemodel.

NOTE:Turnthetoolupsidedownsothatyoucan

replace the cutting tool easily.

Cutter blade

CAUTION: When handling the cutter blade,

always wear gloves and put the blade cover on

the blade.

CAUTION: The cutter blade must be well pol-

ished, and free of cracks or breakage.Ifthecutter

blade hits a stone during operation, stop the tool and

check the blade immediately.

CAUTION: The cutter blade-fastening nut

(with spring washer) wears out in course of time.

If there appears any wear or deformation on the

spring washer, replace the nut. Ask your local

authorized service center to order it.

CAUTION: The outside diameter of the cutter

blade must be as follows. Never use any cutter

blade with larger outside diameter.

— 3-tooth blade : 230 mm

— 4-tooth blade : 230 mm

— 8-tooth blade : 230 mm

►Fig.21: 1. Nut 2. Clamp washer 3. Cutter blade

4. Receive washer 5.Spindle6.Hexwrench

1. Insertthehexwrenchthroughtheholeinthetool

headtolocktheshaft.Rotatetheshaftuntilthehex

wrenchisfullyinserted.

Mountthecutterbladeontothereceivewashersothatthe

arrows on the blade and protector are pointing in the same direction.

►Fig.22: 1. Arrow

3. Put the clamp washer onto the cutter blade and

thentightenthenutsecurelybytheboxwrench.

►Fig.23: 1.Hexwrench2.Boxwrench3.Tighten

4. Loosen

NOTE:Tighteningtorque:16-23N•m

4. Removethehexwrenchfromthetoolhead.

Toremovethecutterblade,followtheinstallationproce-

dures in reverse.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUR368A in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 8,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUR368A Manual

Product: