690568

Makita DUR368A Manual

23
Zoom out
Zoom in
Previous page
1/40
Next page
23 ENGLISH
Nylon cutting head
NOTICE: Be sure to use genuine Makita nylon
cutting head.
►Fig.24: 1. Nylon cutting head 2. Receive washer
3.Spindle4.Hexwrench5.Tighten
6. Loosen
1. Insertthehexwrenchthroughtheholeinthetool
headtolocktheshaft.Rotatetheshaftuntilthehex
wrenchisfullyinserted.
2. Place the nylon cutting head onto the spindle and
tighten it securely by hand.
3. Removethehexwrenchfromthetoolhead.
Toremovethenyloncuttinghead,followtheinstallation
procedures in reverse.
Plastic blade
NOTICE: Be sure to use genuine Makita plastic
blade.
►Fig.25: 1. Plastic blade 2. Receive washer
3.Spindle4.Hexwrench5.Tighten
6. Loosen
1. Insertthehexwrenchthroughtheholeinthetool
headtolocktheshaft.Rotatetheshaftuntilthehex
wrenchisfullyinserted.
2. Place the plastic blade onto the spindle and
tighten it securely by hand.
3. Removethehexwrenchfromthetoolhead.
Toremovetheplasticblade,followtheinstallationpro-
cedures in reverse.
OPERATION
Attaching the shoulder harness
CAUTION: Always use the shoulder harness
attached to the tool. Before operation, adjust the
shoulder harness according to the user size to
prevent fatigue.
CAUTION: Before operation, make sure that
the shoulder harness is properly attached to the
hanger on the tool.
1. Weartheshoulderharnessonyourleftshoulder.
►Fig.26
2. Clasp the hook on the shoulder strap to tool's
hanger.
DUR368A
►Fig.27: 1. Hook 2. Hanger
DUR368L
►Fig.28: 1. Hook 2. Hanger
3. Adjusttheshoulderharnesstoacomfortable
working position.
►Fig.29
Theshoulderharnessfeaturesameansofquick
release.
Simplysqueezethesidesofthebuckletoreleasethe
toolfromtheshoulderharness.
DUR368A
►Fig.30: 1. Buckle
DUR368L
►Fig.31: 1. Buckle
Adjusting the hanger position
Formorecomfortablehandlingofthetool,youcan
change the hanger position.
Besuretoadjustthehangerpositionasshowninthe
gure.
►Fig.32
1 Thehangerpositionfromtheground
2 Thecuttingtoolpositionfromtheground
3 Thehorizontaldistancebetweenthehangerandthe
unguardedpartofthecuttingtool
Loosenthehexsocketheadboltonthehanger.Move
thehangertoacomfortableworkingpositionandthen
tighten the bolt.
DUR368A
►Fig.33: 1. Hanger 2.Hexsocketheadbolt
DUR368L
►Fig.34: 1. Hanger 2.Hexsocketheadbolt
Correct handling of the tool
WARNING: Always position the tool on your
right-hand side.Correctpositioningofthetoolallows
formaximumcontrolandwillreducetheriskofseri-
ouspersonalinjurycausedbykickback.
WARNING: Be extremely careful to maintain
control of the tool at all times. Do not allow the
tool to be deected toward you or anyone in the
work vicinity.Failuretokeepcontrolofthetool
couldresultinseriousinjurytothebystanderandthe
operator.
WARNING: To avoid accident, leave more
than 15m (50 ft) distance between operators when
two or more operators work in one area. Also,
arrange a person to observe the distance between
operators. If someone or an animal enters the
working area, immediately stop the operation.
CAUTION: If the cutting tool accidentally
impacts a rock or hard object during operation,
stop the tool and inspect for any damage. If the
cutting tool is damaged, replace it immediately.
Useofadamagedcuttingtoolmayresultinserious
personalinjury.
CAUTION: Remove the blade cover from the
cutter blade when cutting the grass.
Correct positioning and handling allow optimum control
andreducetheriskofinjurycausedbykickback.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DUR368A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUR368A in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 8,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info