Manual Makita DUR368A (page 21 of 40) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690568

Zoom out

Zoom in

1/40

21 ENGLISH

Automatic Torque Drive Technology

WhenyouturnontheAutomaticTorqueDrive

Technology(ADT),thetoolrunsatoptimumrotation

speedandtorquefortheconditionofgrassbeingcut.

TostartADT,pressandholdthereversebuttonuntilthe

ADTindicatorturnson.Afterthat,tapthemainpower

button to select the cutting tool attached to the tool. Light

the lamp beside marking to select cutter blade and

plastic blade, marking to select nylon cutting head.

TostopADT,pressandholdthereversebuttonuntilthe

ADTindicatorturnsoff.

►Fig.11: 1. marking 2. marking 3.ADT

indicator 4.Mainpowerbutton5. Reverse

button

Indicator Mode Cutting tool Rotation

speed

ADT

(Cutter blade)

Cutter blade

Plastic blade

3,500 - 6,500

min

-1

ADT

(Nylon cutting

head)

Nylon cutting

head

3,500 - 6,500

min

-1

Reverse button for debris removal

WARNING: Switch off the tool and remove

the battery cartridge before you remove entan-

gled weeds or debris which the reverse rotation

function can not remove.Failuretoswitchoffand

remove the battery cartridge may result in serious

personalinjuryfromaccidentalstart-up.

Thistoolhasareversebuttontochangethedirectionofrotation.

Itisonlyforremovingweedsanddebrisentangledinthetool.

Toreversetherotation,tapthereversebuttonandpull

thetriggerwhenthecuttingtoolisstopped.Thepower

lamp starts blinking, and the cutting tool rotates in

reverse direction when you pull the switch trigger.

Toreturntoregularrotation,releasethetriggerandwait

until the cutting tool stops.

►Fig.12: 1. Reverse button 2. Power lamp

NOTE: During the reverse rotation, the tool operates

onlyforashortperiodoftimeandthenautomatically

stops.

NOTE: Once the tool is stopped, the rotation returns

to regular direction when you start the tool again.

NOTE:Ifyoutapthereversebuttonwhilethecutting

tool is still rotating, the tool comes to stop and to be

readyforreverserotation.

Electric brake

Thistoolisequippedwithanelectricbrakeforthecut-

tingtool.Ifthetoolconsistentlyfailstoquicklystopthe

cuttingtoolaftertheswitchtriggerisreleased,havethe

tool serviced at our service center.

CAUTION: This brake system is not a substi-

tute for the protector. Never use the tool without

the protector. An unguarded cutting tool may result

inseriouspersonalinjury.

Electronic function

Constant speed control

Thespeedcontrolfunctionprovidestheconstantrota-

tionspeedregardlessofloadconditions.

Soft start feature

Softstartbecauseofsuppressedstartingshock.

ASSEMBLY

WARNING: Always be sure that the tool is

switched off and battery cartridge is removed

before carrying out any work on the tool.Failureto

switchoffandremovethebatterycartridgemayresult

inseriouspersonalinjuryfromaccidentalstart-up.

WARNING: Never start the tool unless it is

completely assembled.Operationofthetoolina

partially assembled state may result in serious per-

sonalinjuryfromaccidentalstart-up.

Installing the handle

For DUR368A

1. Inserttheshaftofthehandleintothegrip.Align

thescrewholeinthegripwiththeoneintheshaft.

Tightenthescrewsecurely.

►Fig.13: 1. Grip 2.Screw3.Shaft

NOTICE: Note the direction of the grip. The

screw holes will not be aligned if the grip is not

inserted in the correct direction.

Place handle between handle clamp and handle holder.

Adjustthehandletoananglethatprovidesacomfortable

workingpositionandthensecurewithhexsocketheadbolts.

►Fig.14: 1.Hexsocketheadbolt2. Handle clamp

3. Handle holder

For DUR368L

1. Attach the upper and lower clamps on the damper.

2. Putthehandleontheupperclampandxitwith

hexsocketheadboltsasillustrated.

►Fig.15: 1.Hexsocketheadbolt2. Handle 3. Upper

clamp 4. Damper 5. Lower clamp 6.Spacer

CAUTION:

Do not remove or shrink the spacer. Doing

solosethebalanceofthetoolandmaycausepersonalinjury.

Attaching the barrier

Country specic

Ifthebarrierisincludedinyourmodel,attachittothe

handle using the screw on the barrier.

►Fig.16: 1. Barrier 2.Screw

CAUTION:

After assembling the barrier, do not

remove it.Thebarrierworksasasafetyparttoprevent

youfromcontactingthecuttingbladeaccidentally.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUR368A in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 8,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUR368A Manual

Product: