Manual Makita DUR368A (page 20 of 40) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690568

Zoom out

Zoom in

1/40

20 ENGLISH

Overload protection

Ifthetoolisoverloadedbyentangledweedsorotherdebris,the

speed indicator 2 and 3 start blinking and the tool automatically stops.

Inthissituation,turnthetooloffandstoptheapplication

thatcausedthetooltobecomeoverloaded.Thenturn

the tool on to restart.

Overheat protection for tool or battery

Therearetwotypesofoverheating;tooloverheating

andbatteryoverheating.Whenthetooloverheating

occurs,allspeedindicatorsblink.Whenthebattery

overheating occurs, the speed indicator 1 blinks.

Iftheoverheatingoccurs,thetoolstopsautomatically.Letthe

tooland/orbatterycooldownbeforeturningthetoolonagain.

Overdischarge protection

Whenthebatterycapacitybecomeslow,thetoolstops

automatically and the speed indicator 1 blinks.

Ifthetooldoesnotoperateevenwhentheswitchesareoper-

ated,removethebatteriesfromthetoolandchargethebatteries.

Indicating the remaining battery capacity

Only for battery cartridges with the indicator

►Fig.6: 1. Indicator lamps 2. Check button

Press the check button on the battery cartridge to indi-

catetheremainingbatterycapacity.Theindicatorlamps

lightupforafewseconds.

Indicator lamps Remaining

capacity

Lighted Off Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

Thebattery

may have

malfunctioned.

NOTE:Dependingontheconditionsofuseandthe

ambienttemperature,theindicationmaydifferslightly

fromtheactualcapacity.

Main power switch

Tapthemainpowerbuttontoturnonthetool.

Toturnoffthetool,pressandholdthemainpowerbut-

tonuntilthepowerlampandspeedindicatorgooff.

►Fig.7: 1.Speedindicator2.Mainpowerbutton

3. Power lamp

NOTE:Thetoolwillautomaticallyturnedoffifitisleft

withoutanyoperationsforacertainperiodoftime.

Switch action

WARNING: For your safety, this tool is

equipped with lock-off lever which prevents the

tool from unintended starting. NEVER use the tool

if it runs when you simply pull the switch trigger

without pressing the lock-off lever. Return the

tool to our authorized service center for proper

repairs BEFORE further usage.

WARNING: NEVER tape down or defeat pur-

pose and function of lock-off lever.

CAUTION: Before installing the battery car-

tridge into the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released. Operating a tool

with a switch that does not actuate properly can lead

tolossofcontrolandseriouspersonalinjury.

CAUTION: Never put your nger on the main

power button and switch trigger when carrying

the tool.Thetoolmaystartunintentionallyandcause

injury.

NOTICE: Do not pull the switch trigger hard with-

out pressing the lock-off lever. This can cause

switch breakage.

Topreventtheswitchtriggerfrombeingaccidentally

pulled,alock-offleverisprovided.Tostartthetool,

depressthelock-offleverandpulltheswitchtrigger.

Thetoolspeedincreasesbyincreasingpressureonthe

switch trigger. Release the switch trigger to stop.

DUR368A

►Fig.8: 1.Lock-offlever2.Switchtrigger

DUR368L

►Fig.9: 1.Lock-offlever2.Switchtrigger

Speed adjusting

Youcanadjustthetoolspeedbytappingthemain

power button. Each time you tap the main power button,

thelevelofspeedwillchange.

►Fig.10: 1.Speedindicator2.Mainpowerbutton

Speed indicator Mode Rotation speed

High 6,500 min

-1

Medium 5,300 min

-1

Low 3,500 min

-1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUR368A in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 8,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUR368A Manual

Product: