Manual Makita DUR368A (page 24 of 40) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690568

Zoom out

Zoom in

1/40

24 ENGLISH

DUR368A

►Fig.35

DUR368L

►Fig.36

When using a nylon cutting head (bump & feed

type)

Thenyloncuttingheadisadualstringtrimmerhead

providedwithabump&feedmechanism.

Tofeedoutthenyloncord,tapthecuttingheadagainst

the ground while rotating.

►Fig.37: 1.Mosteffectivecuttingarea

NOTICE: The bump feed will not operate prop-

erly if the nylon cutting head is not rotating.

NOTE:Ifthenyloncorddoesnotfeedoutwhile

tapping the head, rewind/replace the nylon cord

byfollowingtheproceduresinthesectionforthe

maintenance.

MAINTENANCE

WARNING: Always be sure that the tool is

switched off and battery cartridge is removed

before attempting to perform inspection or main-

tenance on the tool.Failuretoswitchoffandremove

the battery cartridge may result in serious personal

injuryfromaccidentalstart-up.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

TomaintainproductSAFETYandRELIABILITY,

repairs,anyothermaintenanceoradjustmentshould

beperformedbyMakitaAuthorizedorFactoryService

Centers,alwaysusingMakitareplacementparts.

Replacing the nylon cord

WARNING: Use only the nylon cord with

diameter specied in this instruction manual.

Never use heavier line, metal wire, rope or the

like.Failuretodosomaycausedamagetothetool

andresultinseriouspersonalinjury.

WARNING: Always remove the nylon cutting

head from the tool when replacing the nylon cord.

WARNING: Make sure that the cover of the

nylon cutting head is secured to the housing

properly as described below.Failuretoproperly

secure the cover may cause the nylon cutting head to

yapartresultinginseriouspersonalinjury.

Replacethenyloncordifitisnotfedanymore.The

methodofreplacingthenyloncordvariesdependingon

thetypeofthenyloncuttinghead.

95-M10L

►Fig.38

B&F ECO 4L

►Fig.39

For Ultra Auto 4

►Fig.40

UN-74N

►Fig.41

Manual feed type

Whenthenyloncordgetsshort,pullitoutfromthe

eyeletandfeeditfromtheanothereyelet.

►Fig.42

Replacing the plastic blade

Replacethebladeifitiswornoutorbroken.

►Fig.43

Wheninstallingtheplasticblade,alignthedirectionof

thearrowonthebladewiththatoftheprotector.

►Fig.44: 1. Arrow on the protector 2. Arrow on the

blade

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUR368A in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 8,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUR368A Manual

Product: