716906
17
Zoom out
Zoom in
Previous page
1/32
Next page
Fig. 43
uPosition the bearing bracket and engage. If necessary
push apart carefully. Fig. 43 (1)
uPosition the panel. Fig. 43 (2)
uSwing in the panel and click into place. Fig. 43 (3)
uSlide on the external cover. Fig. 43 (4)
uClose the upper door. Fig. 43 (5)
4.4 Water connection
WARNING
Electricity in combination with water!
Electric shock.
uBefore connecting to the water pipe: Disconnect the
appliance from the mains.
uBefore connecting to water supply lines: Shut off the
water supply.
uThe connection to the drinking water mains may only be
carried out by a qualified gas and water engineer.
WARNING
Risk of poisoning!
uThe water quality has to comply with the drinking water
ordinance of the respective country (e.g. 98/8
uConnect to the drinking water supply only.
uThe IceMaker serves exclusively for making ice cubes in
household quantities and has to be operated with water
suitable for the purpose.
Fig. 44
ab c M
~ 1100 mm ~ 700 mm ~ 110 mm Solenoid valve
-The water pressure must be between 0.15 MPa and
0.6 MPa (1.5 bar - 6 bar).
-The water must be connected to the appliance via a cold
water pipe that can withstand the operating pressure and
complies with hygiene standards.
Use the stainless steel hose supplied (length 1.5 m).
Do not reuse old hoses. A 3 m hose is available as an
optional extra. This must be professionally installed.
A filter with a seal is located in the hose connector.
-A stopcock must be provided between the hose line
and the domestic water connection to cut off the water
supply if necessary.
-The stopcock must be located outside the back of the
appliance and be within easy reach so that the appliance
can be inserted as deeply as possible and the stopcock
can be turned off quickly. Stick to the clearances.
-All devices and equipment used to supply water must
comply with the regulations in force in the respective
country.
-Do not damage or kink the water supply line during
installation.
Fig. 45
The solenoid valve is located at the bottom on the back of
the appliance. It has a R3/4 connecting thread.
For specialist staff:
Connecting the stainless steel hose: The back of the appli‐
ance must be accessible.
WARNING
Broken auxiliary tool Fig. 45 (5).
Cuts.
uOnly use an auxiliary tool Fig. 45 (5) at room temperature.
Connecting the hose to the appliance:
uRemove the cover Fig. 45 (2).
uEasy to fit: Place the straight end of the hose Fig. 45 (7) to
the left on the floor.
uSlide the nut Fig. 45 (4) over the angled end of the hose
Fig. 45 (3) up to the end and secure.
Fig. 46
Putting into operation
* Depending on model and options 17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SWTNes 4285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SWTNes 4285 in the language / languages: English as an attachment in your email.

The manual is 2.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SWTNes 4285

Liebherr SWTNes 4285 User Manual - German - 34 pages

Liebherr SWTNes 4285 User Manual - Dutch - 34 pages

Liebherr SWTNes 4285 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info