716906
16
Zoom out
Zoom in
Previous page
1/32
Next page
uSupport the door: Take off the adjustable foot on the
bearing bracket using the open-ended wrench SW10 until
it comes into contact with the floor, then turn an addi‐
tional 90°.
4.3.15 Fit the bottom soft stop mechanism
Fig. 39
uSlide the soft stop mechanism on the bearing bracket
side at an angle into the slot as far as the limit stop.
Fig. 39 (1)
uSlide the soft stop mechanism fully into the slot.
Fig. 39 (2)
wThe unit is positioned correctly when the rib on the soft
stop mechanism is in the guide.
uTighten the screw with the T15 screwdriver. Fig. 39 (3)
uPush the cover over the hinge. Fig. 39 (4)
Fig. 40
The door is open 90°
uTurn the hinge in the mount. Fig. 40 (1)
uInsert the bolt with a T15 screwdriver in the mount and
hinge. Make sure that the catch mechanism is sitting
correctly in the groove. Fig. 40 (2)
uPush the bearing bracket cover along the hinge and fit on
the mount. Fig. 40 (3)
uRemove the locking device. Fig. 40 (4)
uPosition the panel on the handle side and swing it in.
Fig. 40 (5)
wThe panel is clicked into place.
uClose the bottom door.
4.3.16 Fit the top soft stop mechanism
Fig. 41
uSlide the soft stop mechanism on the bearing bracket
side at an angle into the slot as far as the limit stop.
Fig. 41 (1)
uSlide the unit in fully.
wThe unit is positioned correctly when the rib on the soft
stop mechanism is in the guide in the housing.
uTighten the screw with the T15 screwdriver. Fig. 41 (2)
Fig. 42
The door is open 90°.
uTurn the hinge in the bearing bracket. Fig. 42 (1)
uInsert the bolt in the bearing bracket and hinge. Make
sure that the catch mechanism is sitting correctly in the
groove. Fig. 42 (2)
uRemove the locking device. Fig. 42 (3)
uSlide on the cover. Fig. 42 (4)
Putting into operation
16 * Depending on model and options
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SWTNes 4285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SWTNes 4285 in the language / languages: English as an attachment in your email.

The manual is 2.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SWTNes 4285

Liebherr SWTNes 4285 User Manual - German - 34 pages

Liebherr SWTNes 4285 User Manual - Dutch - 34 pages

Liebherr SWTNes 4285 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info