716906
30
Zoom out
Zoom in
Previous page
1/32
Next page
The reason for too high a temperature may be:
-hot, fresh food was inserted
-too much warm room air flowed in when rearranging and
removing food
-the power was cut off for a while
-the appliance is faulty
uOpen the door.
uPress the temperature alarm symbol.
wThe audible signal stops. The warmest temperature
reached during the malfunction is displayed on the
screen.
uPress the screen or wait for 30 seconds.
wThe display switches to the home screen. Arrows and the
temperature alarm symbol appear in the relevant temper
ature field . In addition the messages symbol is
displayed in the menu field .
uCheck the food for quality. Do not consume spoiled food.
Do not re-freeze defrosted food,
uClose the door.
wThe symbols are greyed out when the target temperature
is reached.
If the alarm status persists or the temperature cannot be
reset independently:
(see 7 Malfunctions) .
Power cut
An audible warning sounds. The power cut symbol
appears on the display.
The temperature had risen too high over the last
few hours or days due to a power cut or power
interruption. When the power is restored the appli‐
ance continues to work at the last temperature
setting. Activated reminders are retained.
uOpen the door.
uPress the power cut symbol.
wThe audible signal stops. The warmest temperature
reached in the freezer compartment during the power cut
is displayed on the screen.
uPress the screen or wait for 30 seconds.
wThe display switches to the home screen. Arrows and the
symbol temperature alarm appear in the relevant temper
ature field . The messages symbol is also shown in
the menu field .
uCheck the food for quality. Do not consume spoiled food.
Do not re-freeze defrosted food,
uClose the door.
wThe symbols are greyed out when the target temperature
is reached.
Appliance faults
An audible warning sounds. The appliance fault
symbol appears on the display with the relevant
error code.
An appliance component indicates a fault.
uOpen the door.
uNote down the fault code.
uPress the appliance fault symbol.
wThe audible signal stops. The display switches to the
home screen.
uClose the door.
uContact Customer Services (see 6 Maintenance) .
Water inlet fault
An audible warning sounds. The appliance fault
symbol appears on the display with the WATER
error code.
The water connection to the IceMaker is not open, the water
feed is interrupted or the filter in the water inlet hose
connection is blocked.
uOpen the door.
uPress the appliance fault symbol.
wThe audible signal stops. The display switches to the
home screen. The IceMaker switches off.
uClose the door.
uOpen the water connection.
-or-
uCheck the water connection and the hoses (see 4 Putting
into operation) .
-or-
uClean the filter.
uSwitch the IceMaker on (see 5.4.10.2 Switch the IceMaker
on.) .
uContact Customer Service if the message persists
(see 6 Maintenance) .
Other messages
FreshAirChange filter (see 6 Maintenance)
Clean the ventilation grille (see 6 Mainte‐
nance)
Open, close IceMaker drawer
9 Decommissioning
9.1 Switching the appliance off
Note
If you cannot switch off the appliance or freezer section or
wine cooler, turn off the childlock feature.
uSwitch the child safety device off (see 5.2.2 Switching
the child safety device off) .
9.1.1 Switch off the appliance from the menu
The whole appliance is switched off. The screen goes black.
uPress menu.
uPress the navigation arrows until the standby
symbol is displayed.
uPress OK.
wThe standby symbol flashes on the whole screen. The
whole appliance is switched off.
wAfter 10 minutes the standby symbol goes out.
9.1.2 Switch the wine cooler off
You can switch off the wine cooler separately if required.
uPress the wine cooler field.
uPress plus.
wThe plus symbol is greyed out if it is pressed again after
selecting the hottest temperature. The standby symbol is
displayed on the screen.
uOK Press .
wThe standby symbol is displayed in the wine cooler field.
wThe wine cooler is off.
9.2 Taking the appliance out of service
uEmpty the appliance.
uPut the IceMaker in the cleaning position (see 6 Mainte‐
nance) .
uSwitch off the appliance (see 9 Decommissioning) .
Decommissioning
30 * Depending on model and options
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SWTNes 4285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SWTNes 4285 in the language / languages: English as an attachment in your email.

The manual is 2.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SWTNes 4285

Liebherr SWTNes 4285 User Manual - German - 34 pages

Liebherr SWTNes 4285 User Manual - Dutch - 34 pages

Liebherr SWTNes 4285 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info