690032
25
Zoom out
Zoom in
Previous page
1/194
Next page
Note: It is best to perform rinsing after the appliance has remained unused for several days.
3.4 Preparing the grinder
Adjust the fineness of your coffee grinding to set the strength of your coffee. The finer the grind setting,
the stronger and creamier the coffee will be.
Turn the “Grinding fineness setting” button to set the degree of grinding fineness.
Adjust the size of the ground beans by turning the ‘Coffee grinding setting’ button (L) on the bean tank.
You are advised to do this during the grinding process and gradually. After three preparations, you will
notice a very distinctive difference in taste.
Turn anticlockwise for a finer grind. Turn clockwise for a coarser grind. Fig. 13
4.1 Preparing an espresso
The quantity of water for an espresso must be between 20 and 70 ml.
Each time you plug your machine in, it will carry out an initialisation cycle.
Press the button, wait for the end of pre-heating and perform a rinsing operation if you wish.
The drink selection menu will be displayed.
Put a cup under the coffee outlets. You can lower or raise the coffee outlets to suit the size of your
cups.
Use the rotating button to select your drink and confirm by pressing the OK key.
Note: You can press the button once to stop filling your cup.
4.2 Making a coffee
The amount of water required for a coffee is between 80 and 160 ml.
4.3 Making a long coffee
The amount of water required for a long coffee is between 120 and 240 ml. The machine
automatically carries out a double cycle, do not remove your cup before the process has ended.
There is a temperature setting function to control how hot your coffee is (see § Settings page 32).
Caution! Do not remove the water compartment before the end of the cycle (that is around 15
seconds after the coffee has finished dripping through).
4.4 2-cup function
Your appliance enables you to prepare 2 cups of coffee or espresso for the following 3 kinds of drink :
espresso / strong espresso / coffee. For "Large coffee" drinks, the 2-cup function is not available.
Remember not to remove the cups after the first cycle. The drink select menu will be displayed.
Put two cups under the coffee outlets.
You can lower or raise the coffee outlets to suit the size of your cups.
Select your drink and confirm by clicking twice on the OK key.
A message will appear to tell you that you have chosen two cups.
Note: The appliance will automatically sequence 2 complete coffee making cycles.
Caution! AUTOMATIC RINSING OF THE COFFEE NOZZLE
Depending on the type of recipes prepared, the machine may carry out an automatic
rinsing operation when it is switched off.
4. PREPARING ESPRESSO AND ORDINARY COFFEE
!
!
!
!
!
27
EN
KR_ESPRESSO_EA83_EO_EA83_NEW CHARTE 30/05/13 11:28 Page27
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA83 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA83 serie in the language / languages: All languages as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info