Manual Krups EA83 serie (page 24 of 194) (All languages)

690032

Zoom out

Zoom in

1/194

Important: It is recommended that you do not use oily, caramelised or flavoured coffee beans for

this machine. These kinds of beans may damage the machine.

3.1 First use / setting machine parameters

Use the rotating button to select a function, increase or reduce values.

Confirm your choice using the OK key.

Press to turn your appliance on. Fig. 10

Follow the instructions that appear on the “choice of language” screen.

Use the rotating button to choose a language (highlighted). Press the OK key to validate.

Select Fig. 11

Confirm Fig. 12

When you first use your appliance, it will ask you to set several parameters. If you unplug your appliance,

you will again be asked for some of these parameters.

The appliance will ask you to set:

Language

You can select your chosen language from those offered.

Volume Unit

Choose either ml or oz as your measurement unit.

Date

You must set the date.

Clock

You can choose between 12 hour or 24 hour time display.

Auto-off

You can choose the period after which your appliance will stop automatically, from 30 minutes to 4 hours

by 30 minute increments.

Auto-on

You can automatically start pre-heating of your appliance at your chosen time.

Water Hardness

You must set your water hardness between 0 and 4. See “Water hardness measurement” page 25 sec-

tion.

3.2 First use / setting installing the filter

ON first use, the product ask you if you want to change the filter. Press the OK key to validate and then

fold the instructions on the display.

To install the refill into the machine, screw the filter into the back of the water tank.

Adjust the month for installing the refill Fig. 3 by turning the grey band located on the top end of the filter.

The month of replacing the cartridge is shown in position 2 as shown.

Place a 0.6 L container underneath the steam nozzle.

3.3 Rinsing the circuits

Rinsing out the coffee circuit :

Once you have turned the machine on and the preheating stage has completed, you can rinse out the

coffee circuit.

Place a container under the coffee outlets then select "YES" from the menu proposed. The rinsing cycle

will stop automatically after about 40 ml.

Rinsing out the steam circuit :

Place a container under the steam nozzle. Press the key to rinse the steam circuit. The rinsing cycle will

stop automatically after the volume of water displayed has flowed through.

Press at any time to display menus to perform rinsing and then select MAINTENANCE => OK =>

RINSING.

KR_ESPRESSO_EA83_EO_EA83_NEW CHARTE 30/05/13 11:34 Page26

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA83 serie in the language / languages: All languages as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups EA83 serie Manual

Product: