690032

Krups EA83 serie Manual

23
Zoom out
Zoom in
Previous page
1/194
Next page
2.1 Measuring water hardness
Before using the appliance for the first time or if you have noted a change in water hardness, it is
advisable to adapt the appliance to the observed water hardness. To determine the water hardness,
use the measuring stick delivered with the appliance or get in contact with your water board. The
appliance will ask you for the hardness of your water on first use (see First use / Setting machine
parameters section page 26).
Water testing: Fill a glass with water and immerse a water testing stick into it. Fig. 1
After 1 minute the hardness measurement will appear (moderately hard water). Fig. 2
2.2 Claris - Aqua Filter System cartridge
To get the best taste from your coffee and extend your appliance’s service life, we advise you to use
only the Claris - Aqua Filter System cartridge sold as an accessory.
The cartridge comprises a scale-removing substance and activated carbon that reduces chlorine,
impurities, lead, copper, pesticides, etc. that are present in the water. Minerals and trace elements will
then be preserved.
Filter the water using the Claris - Aqua Filter System cartridge to reduce carbonate hardness by as
much as 75 %*, Chlorine – up to 85 %*, Lead – up to 90 %*, Copper – up to 95 %*, Aluminium – up to
67 %*.
Mechanism to memorise the month the cartridge was fitted and when to replace it (after 2 months at
most). Fig. 3
Note: Your appliance will give you a message telling you when to replace your Claris - Aqua Filter
System cartridge.
2.3 Putting the filter in place
To prime the cartridge correctly, follow this procedure every time you fit a cartridge.
When using later or replacing the cartridge: Select the "FILTER" function using the Prog button: :
Maintenance -OK - Filter - OK - Place or change -OK - and follow the instructions on the screen:
On first use, screw the filter cartridge into the bottom of the water tank. Fig. 4
Place a 0.6 L container underneath the steam nozzle. Fig. 5
Pull out and fill the water tank. Fig. 6
Place the lid on the tank to close it. Fig. 7
Open the coffee bean container lid. Add the coffee beans (250g maximum). Fig. 8
Close the coffee bean container lid again. Fig. 9
Note: Do not fill the water tank with hot water, milk or any other liquid.
!
3. PREPARING THE APPLIANCE
2. BEFORE FIRST USE
Degree of
hardness
Class 0
Very soft
Class 1
Soft
Class 2
Moderately
hard
Class 3
Hard
Class 4
Very hard
° dH
< 3° > 4° > 7° > 14° > 21°
° e
< 3,75° > 5° > 8,75° > 17,5° > 26,25°
° f
< 5,4° > 7,2° > 12,6° > 25,2° > 37,8°
Appliance
setting
01234
!
25
* indications provided by the manufacturer
EN
KR_ESPRESSO_EA83_EO_EA83_NEW CHARTE 30/05/13 11:28 Page25
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA83 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA83 serie in the language / languages: All languages as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info