Manual Krups EA83 serie (page 27 of 194) (All languages)

690032

Zoom out

Zoom in

1/194

6.2 With the steam nozzle (depending on model)

Note: After the steam function has been used, the nozzle will be hot, and we recommend that you

wait for a few moments before handling it.

Check that the steam nozzle is correctly fitted. Fig. 22

Pour the milk into your milk jug. Only half fill it. Immerse the nozzle in the milk. Immerse the steam

nozzle in the milk. Fig. 23

Press the “steam”

key Fig. 15 and follow the instructions on the screen.

When the nozzle is hot, handle it only with the plastic part. Fig. 24

Again press the “steam” key Fig. 15 to stop the cycle.

Be careful, because the cycle does not stop immediately.

To achieve a good result:

Stage 1: While holding the milk container, immerse the steam spout into the milk (about 2 cm) and wait

for it to start frothing.

Stage 2: Raise the container slightly (about 1 cm). Never immerse the metal tube completely.

Stage 3: Lower the container gradually as the foam increases.

To remove any remaining milk from the steam nozzle, place a container under the nozzle and press the

“hot water” key.

Let the steam escape for at least 10 seconds and then again press the “hot water” key to stop the

process.

You can remove the steam nozzle for thorough cleaning Fig. 25. Wash it using a brush with water and

a little non-abrasive washing up liquid. Rinse and dry it Fig. 25-26.Before re-fitting, make certain that

the air inlet holes are not clogged by milk residues. Clean out the holes with a needle if necessary Fig.

27.

Note: To interrupt the steam function, just press any key. If the nozzle is blocked, clean it out with

a fine needle.

7.1 Emptying the coffee grounds collector, the coffee cleaning tray and

the drip tray

After 12 coffees, the machine will ask you to empty the coffee grounds collector and to clean the coffee

drawer. Failure to perform these operations correctly can damage your machine.

Wait at least for 8 seconds before refitting the coffee drawer and the coffee grounds collector, and

follow the instructions on the screen.

The drip tray collects the used water and the coffee grounds collector collects the used coffee grounds.

The coffee drawer allows you to remove any coffee grounds below the

percolation chamber.

If the above message appears, remove, empty and clean the drip tray.

1. Remove, empty and clean the coffee grounds collector.Fig. 28

2. Remove the cleaning tray. Fig. 28

First put the cleaning tray back then the coffee grounds collector.

The drip tray is equipped with a float to indicate when it needs emptying.

Fig. 29

7. MAINTAINING YOUR APPLIANCE

KR_ESPRESSO_EA83_EO_EA83_NEW CHARTE 30/05/13 11:28 Page29

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA83 serie in the language / languages: All languages as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups EA83 serie Manual

Product: