508772

Konig Electronic SEC-ALARM210 Manual

8
Zoom out
Zoom in
Previous page
1/151
Next page
8
cannot establish a steady communication with it. If this is the case, please install the sensor closer
to the control centre.
4. Replace the battery of the sensor in that zone if the control centre does not respond when the
sensor is activated within short range. If you have multiple sensors in a zone, you may test the
function of each sensor to identify which sensor is giving problems.
Erase sensors:
To erase a sensor from a zone, the control centre will erase all sensors in that zone. All sensors to a
particular zone will need to be synchronised again.
To erase a zone:
Step 1: Press and hold the “Learn Button” on the control centre. The unit will beep once.
Step 2: While holding the “Learn button”, also press and hold the zone button to be erased. Hold both
buttons for 5 seconds until the control centre emits 2 beeps and the zone indicator flashes twice.
Step 3: Release all buttons.
Password set up:
The password is used for arming and disarming the control centre. The factory default password is 1 2
3 4. It is recommended to set up your own password by following the steps below.
Step 1: Press and hold the “Learn Button”.
Step 2: While holding the “Learn Button”, also press and hold the “Arm Button”. Hold for 3 seconds
until you hear a long beep and the green power indicator flashes.
Step 3: Release both buttons. Enter the current password (with first use it is 1 2 3 4). You will hear
2 beeps.
Step 4: Enter the new 4-digit password, you will hear 2 beeps.
Step 5: Enter the new 4-digit password again to confirm. A long beep will sound and the green
indicator will stop flashing indicating your new password has been set.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-ALARM210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-ALARM210 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info