Manual Konig Electronic SEC-ALARM210 (page 10 of 151) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

508772

Zoom out

Zoom in

1/151

To arm the control centre in home mode:

Step 1: Enter the 4-digit password

Step 2: Press and hold the “Arm Button” for

3 seconds. The arm indicator will be ON

steady, indicating the control centre is now

armed in home mode.

Step 3: To disarm, enter the 4-digit password.

2) Arm Away

This setting is used when you leave home. By

arming the system in Away mode, you will have

45 seconds to leave after arming. After 45

seconds, all sensors in zones 1, 2, and 3 are

armed. Activating these sensors in Arm Away

mode will result in 30 seconds entry delay. If a

valid password is not entered during the 30

second entry delay, the alarm will sound.

To arm the Control Panel in Away mode:

Step 1: Enter the 4-digit Password

Step 2: Press the “Arm Button” twice. The Arm indicator will flash indicating the control centre is now

armed in Away mode.

Step 3: To disarm, enter the 4-digit Password.

Note: If a sensor in zone 4 is activated, it will not activate the alarm. Zone 4 is a dedicated alert zone, it

will sound alert beeping only.

Disarm alarm:

To disarm the system, enter the 4-digit password. The Arm indicator will be off if a valid password is

entered. If the alarm is activated, enter the 4-digit password to stop the alarm sound. After entering the

valid password, the entry delay or alarm will stop. The green power indicator will flash for 3 seconds,

which is normal.

Bypass zone alarm:

There may be occasions when you would like to temporarily prevent the sensors in a zone from

triggering the alarm. In this situation you can bypass a zone when arming the control centre. Once the

system is disarmed, the bypass setting will be removed.

Example:

You may want to leave a window open but to arm the system you can bypass the zone with the

window sensor and continue to arm the system. Without bypassing this zone, the control centre

cannot be armed.

To bypass a zone:

Step 1: Press and hold the “Zone Button” that you want to bypass for 3 seconds. After 3 seconds the

zone indicator will go steady, indicating this zone is set to bypass.

Step 2: Arm the system (Home or Away)

To remove the bypass, press and hold the zone button for 3 seconds, or disarm the system.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-ALARM210 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Konig Electronic SEC-ALARM210 Manual

Product: