Manual Konig Electronic SEC-ALARM210 (page 9 of 151) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

508772

Zoom out

Zoom in

1/151

Operating the alert function:

n alert notification is given when

any sensor is activated while the

system is disarmed. Different

alert notifications can be

provided but it depends on the

setting of the type of alert switch

on the side of the control centre.

If the type of alert switch is set to “Alert”, the number of beeps depends on which zone is activated.

The beeping will continue until the sensor is deactivated, for example, door is closed.

Example:

Zone 1 sensor: “1 beep, pause, 1 beep, pause, 1 beep, pause… etc.”

Zone 2 sensor: “2 beeps, pause, 2 beeps, pause, 2 beeps, pause… etc.”

Zone 3 sensor: “3 beeps, pause, 3 beeps, pause, 3 beeps, pause… etc.”

Zone 4 sensor: “4 beeps, pause, 4 beeps, pause, 4 beeps, pause… etc.”

To temporarily disable the beeping while it is sounding, you may press the “Mute Button” on the side of

the control centre. It will stop all the current beeping. This is useful when a window needs to be

opened for a while for ventilation. To deactivate the mute, reset the sensor (for example close the

window), the mute function will be deactivated. If the window sensor is activated again, the beeping

will continue.

Note: motion sensors in zone 1, 2 and 3 will not respond in alert mode when the system is disarmed.

Motion sensors in zones 1, 2 and 3 will only respond when the control centre is armed. If you would

like to have alert indication for motion sensors, you must program the motion sensors in zone 4.

Operating the alarm function:

You may arm the control centre in 2 different ways: 1) Arm Home and 2) Arm Away

1) Arm Home:

This setting is used when you wish to secure the area but will be at home and moving around within

the armed area. In Arm Home setting, any motion sensors in zone 1, 2 and 3 will not respond to any

movement. Alarm will sound instantly if any of the sensors in zone 1, 2, and 3 are activated (except

motion sensors).

Example:

If you would like to arm the system at night, where all the doors/windows are not expected to be

opened, you can arm the system in home mode. Even walking inside the house (also activates motion

sensor); will not activate the alarm, unless the monitored doors or windows are opened.

Type of alert switch Audio Alert Zone indicator flashing

OFF None Yes

CHIME Chime once when sensor is activated Yes

ALERT Alert beeping depends on zone number Yes

Example: ZONE 1

Door/window

sensor

DOOR OPEN

BEEP

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-ALARM210 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Konig Electronic SEC-ALARM210 Manual

Product: