508772
6
Zoom out
Zoom in
Previous page
1/151
Next page
6
beeping indications. Please select in which zone you need to program the motion detection sensor
before proceeding further.
Repeat step 1 and 2 of the previous chapter to start the synchronising process.
Step 3:
Activate the motion detection sensor by pressing the “Test Button” on the back of the motion detection
sensor.
You will hear a long beep and the zone
indicator stops flashing. The sensor is now
programmed to the control centre
Note:
You may program up to 4 sensors to one zone. Zone 4 is an alert zone. Sensors in this zone are for
alert purpose ONLY and will not trigger the alarm.
Step 4:
After programming the motion detection sensor to the control centre, you may place the control centre
in test mode to verify the communication between the motion detection sensor and the control centre.
1) Remove the adapter and all batteries from the control centre.
2) Press and hold the “Mute Button” and plug the AC adapter back into the control centre. All LED
indicators will be ON; you may release the “Mute Button”. The control centre is now in “Test Mode”,
and it will respond to all motion detection and other sensors.
3) Place the type of alert switch to “Alert” and you may now activate the motion detection sensor by
pressing the “Test Button” of the motion detection sensor. You may also move in front of the motion
detection sensor. Please refer to step 6 for detailed information on how to walk to test the motion
detection sensor.
4) The control centre will respond by flashing the zone indicator and alert beeping, according to the
zone number. 1 beep for zone 1, 2 beeps for zone 2 etc. The beeping will last around 15 seconds
for each activation. After testing, unplug the adapter and plug it back into the control centre; it will
return to normal operating mode.
Step 5:
You may now close the battery cover
and re-insert the screw. Mount the
ball-head joint on the wall with screws
provided. Slide the back of the sensor
into the ball-head joint. The mounting
angle can be adjusted.
Press
“Test Button”
Control centre “long beep”.
Zone indicator OFF.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-ALARM210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-ALARM210 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info