683161
113
Zoom out
Zoom in
Previous page
1/196
Next page
This transceiver comes with 120 memory channels, each of which
can be used for registering operating data.
The 120 memory channels are divided into 3 types which are
assigned respectively with the following channel numbers: 00 to
99, P0 to P9 and E0 to E9. Below is a general outline of the
respective memory channel types.
00 to 99 (standard memory channels):
For registering operating data that are frequently used.
P0 to P9 (memory channels for specific band
segments):
For registering programmable VFO or program scan frequency
ranges.
E0 to E9 (expanded memory channels):
These can be used in the same way as the standard memory
channels.
Data that can be registered in each of the memory channels are
as follows.
Operating Data
Channel
00 to 99/
E0 to E9
P0 to P9
RX Frequency Yes
Yes
(Simplex)
TX Frequency Yes
RX Mode Yes
Yes
(Simplex)
TX Mode Yes
Split Operation Yes No
Start Frequency No Yes
End Frequency No Yes
Tone/CTCSS/Cross Tone Yes Yes
Tone Frequency Yes Yes
CTCSS Frequency Yes Yes
Memory Name Yes Yes
Lockout Yes Yes
Displaying the Memory Channel List
Settings registered in a memory channel can be displayed on the
Memory Channel List screen. The channel for registering
operating frequency data or the channel to use can be selected on
the Memory Channel List screen.
Memory channels can be assigned with names on this screen.
A memory channel can be selected on the Memory Channel List
screen.
1 Press F7 [M.LIST] to display the Memory Channel
List screen.
.
The selected memory channel is indicated in white color.
When registering data to the memory channel, it changes
into a pink display.
Pressing F7 [EXTEND] enlarges the Memory Channel List
screen display. Pressing it again restores the screen to the
original size.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a memory channel.
Operating frequency data that are displayed on the Memory
Channel List screen are as follows.
Operating Data
Description
CH
Displays the channel number.
00 to 99: standard memory channels
P0 to P9: memory channels for specific band
segments
E0 to E9: expanded memory channels
Frequency 1
Registers a single frequency and mode for simplex
channels. (Simplex operation frequency or radio
station frequency)
Registers the RX frequency and mode during split
operation for split channels.
Registers the start frequency and mode of a band
segment for memory channels assigned to
specific band segments.
Frequency 2
This is left blank in the case of simplex channels.
Registers the TX frequency and mode during split
operation for split channels.
Registers the end frequency and mode of a band
segment for memory channels assigned to
specific band segments.
Name Displays the name of the memory channel.
Lockout
Displays the lockout status of the respective
memory channels. Memory scan is not performed
for channels selected with a check mark.
MEMORY CHANNELS 9
9 MEMORY CHANNELS
9-1
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info