683161
112
Zoom out
Zoom in
Previous page
1/196
Next page
TX Tuning
This is a function that transmits constant output carrier
continuously regardless of the current TX mode. It is used for
purposes such as adjusting external antenna tuners or linear
amplifiers.
Assign TX tuning (“TX Tune 1” or “TX Tune 2”) to a PF key. For
more details, please refer to “PF Keys (Programmable Function
Keys)” (16-2).
Toggling between transmission and reception each
time the key is pressed:
1
Press the PF key that is assigned with “TX Tune 1”.
Transmits with a continuous carrier in the CW mode.
<< >> starts to blink.
The meter switches to SWR.
2
Press the PF key that is assigned with “TX Tune 1”
again.
Stops transmission and returns to the original mode.
Activating transmission only while the key is pressed:
1
Press the PF key that is assigned with “TX Tune 2”.
Transmits in the CW mode while the key is pressed.
<< >> starts to blink.
The meter switches to SWR.
2
Release the PF key that is assigned with “TX Tune
2”.
Stops transmission and returns to the original mode.
Adjusting TX Output Power during TX Tuning
1
Press and hold F [MAX-Po] to display the Transmit
Power Limit screen.
.
2
Press F4 [ ]/ F5 [ ] to select a frequency band.
The settings of the selected frequency band column can be
changed.
3
Press F2 [ ]/ F3 [ ] to select the “TX Tune
Power” (horizontal row).
4
Press F6 [–]/ F7 [+] or turn the [MULTI/CH] control
to select a TX output power.
Setting Value 5 to 10 (default) to 100 [W] (1-step)
5
Press and hold F [MAX-Po] or press [ESC] to end
the process.
Timeout Timer (TOT)
This function forcibly stops transmission and restores the receiving
status when the preconfigured TX time is exceeded.
Configure in Menu [6-02] Time-out Timer
Setting Value Off (default)/ 3/ 5/ 10/ 20/ 30 [min]
ID Beep
During continuous transmission via the [SEND] key, [PTT] on the
microphone or the SS/PKS function on the rear panel, a beep tone
(ID ID “
・・ ‒・・ ・・ ‒・・
”) is output whenever the
preconfigured duration from the time transmission starts is
exceeded.
Configure in Menu [6-05] ID Beep
Setting Value Off (default)/ 1 to 30 [min] (1 step)
The transceiver may not function as intended in some
cases as it may return to the receiving state during CW
break-in or VOX transmission.
8 TRANSMIT FUNCTIONS
8-8
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info