683161
111
Zoom out
Zoom in
Previous page
1/196
Next page
To copy after adjusting the TX equalizer settings, press F5
[COPY] on the TX Equalizer Adjustment screen.
4
Press F2 [USER1], F3 [USER2] or F4 [USER3] to
specify the destination for saving the settings.
Copying of the TX equalizer settings is complete and the
display returns to the TX Equalizer screen.
Pressing F7 [CANCEL] returns the display to the TX
Equalizer screen without copying the settings.
5
Press and hold F [TX EQ] or press [ESC] to end the
process.
Saving the TX Equalizer Settings
The steps to write the TX equalizer settings data are as follows.
Before doing so, configure the destination for saving the data in
File Storage Location of the “USB/File Management Menu
(11-2) to “Internal Memory” or “USB Flash Drive”.
To save the data to a USB flash drive, insert a USB flash drive
formatted using this transceiver into
(USB-A).
1
Press and hold F [TX EQ] to display the TX Equalizer
screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a characteristic.
.
3
Press F7 [SAVE].
A message indicating that saving is complete is displayed.
.
4
Press F4 [OK].
5
Press and hold F [TX EQ] or press [ESC] to end the
process.
The saved file is named in the “yyyymmdd_hhmmss”
format. The extension of the saved file is “equ”.
(Example) If the date is 10:20:30 a.m., February 15, 2018:
20180215_102030.equ
The name of the destination folder is as follows. (The name
varies depending on the destination for saving files.)
USB flash drive: “KENWOOD\TS-890\SETTINGS\RX_EQ”
Built-in memory: “SETTINGS\RX_EQ”
When removing the USB flash drive, make sure to execute
Safely Removing the USB Flash Drive” (11-6).
Reading the TX Equalizer Settings
The steps to read the TX equalizer settings that are saved in the
internal memory or USB flash drive are as follows.
To read data from a USB flash drive, insert the USB flash drive
containing the TX equalizer data into (USB-A).
1
Press and hold F [TX EQ] to display the TX Equalizer
screen.
2
Press F2[ ] / F3[ ] or turn the [MULTI/
CH] control to select an equalizer characteristic to
read.
.
3
Press F6 [READ] to display the File (TX EQ.) screen.
The File (TX Equalizer) screen appears.
.
To read data from the internal memory, press F7 [INT.MEM].
To read data from the USB flash drive, press F7
[USB.MEM].
Pressing F1 [ ] exits data file selection and returns the
display to the TX Equalizer screen.
Pressing F6 [DELETE] displays a message to confirm
deletion of the file. Pressing F4 [OK] deletes the file.
Pressing F5 [NAME] allows the file name to be changed.
4
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a file.
5
Press F4 [OK] to read the settings data.
A “reading” message appears while reading is in progress,
which changes to a “reading complete” message when
reading is complete.
6
Press F4 [OK].
7
Press and hold F [TX EQ] or press [ESC] to end the
process.
When removing the USB flash drive, make sure to execute
Safely Removing the USB Flash Drive” (11-6).
The settings data read will be overwritten even if the
equalizer type of the setting application destination
selected in step 2 varies from the equalizer type of the
setting application source selected in step 3.
TRANSMIT FUNCTIONS 8
8-7
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info