683161
115
Zoom out
Zoom in
Previous page
1/196
Next page
Changing the Memory Channel Temporarily
During operation in the memory channel mode, it is possible to
change the frequency and mode temporarily without affecting the
registered memory channel settings.
Changing the Frequency Temporarily
Follow the steps below to change the frequency temporarily.
1
Configure Menu [4-01] Temporary Change
(Memory Channel Configurations) to “On”.
Setting Value Off (default)/ On
2 Press [M/V] to switch to the memory channel mode.
3 Turn the Tuning control to alter the frequency.
To register a frequency that has been changed, store it in a
different memory channel.
For memory channels assigned to specific band
segments, changing the frequency or mode alters the
operating data that is registered in the corresponding
memory channel regardless of this setting.
Operating data related to the operating mode and FM
tone can be altered temporarily regardless of this setting.
Copying the Operating Data of a Memory
Channel
Operating data of a memory channel can be copied to a VFO or
another memory channel.
Memory Shift (Memory → VFO)
The operating data of a memory channel can be copied to a VFO.
It comes in handy when the frequency to use is near the frequency
registered in a memory channel.
Selecting a Memory Channel and Copying to VFO
1 Turn the [MULTI/CH] control in the memory channel
mode to select a memory channel.
2
Press and hold [M/V], or press F6 [M VFO] to copy
the operating data to the VFO.
The operating data of the selected memory channel is copied
to the VFO.
The transceiver exits the memory channel mode and enters
the VFO mode.
When the operating data is temporarily changed, the altered
operating data is copied to the VFO.
Operating data of memory channels assigned to specific
band segments cannot be copied to a VFO.
Operating data that is registered in “Frequency 1” is copied
to the VFO.
Performing memory shift of a split memory channel copies
the information of Frequency 1 to VFO A and that of
Frequency 2 to VFO B and switches the VFO mode to the
split state.
Copying Data from the Memory Channel List Screen
to VFO
1 Press F7 [M.LIST] to display the Memory Channel
List screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a memory channel.
3
Press and hold [M/V], or press F4 [M VFO] to copy
the operating data to the VFO.
After operating data is copied to a VFO, the data at the
source will be erased.
The transceiver exits the memory channel mode and enters
the VFO mode.
Operating data of memory channels assigned to specific
band segments cannot be copied to a VFO.
When in the VFO mode, operating data that is registered in
the memory channel selected on the Memory Channel List
screen is copied to the VFO.
Channel-to-Channel Copying
Operating data of a memory channel can also be copied to another
memory channel. This is useful in cases such as when sorting the
registered memory channels in a certain sequence.
1 Press F7 [M.LIST] to display the Memory Channel
List screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select the memory channel for which the
operating data is to be copied.
3 Press F6 [COPY] to copy the operating data.
The memory channel that is being copied changes into a
pink display.
4
Press F2[ ]/ F3[ ] or turn the [MULTI/CH]
control to select the memory channel for
registering the copied operating data.
5 Press F4 [M.IN] to end the process.
Operating data of the memory channel selected in step 2 is
copied to the memory channel selected in step 4.
Pressing F1 [CANCEL] or [ESC] ends the operation without
copying the operating data.
Operating data of the standard memory channels (00 to
99) and expanded memory channels (E0 to E9) cannot
be copied to memory channels assigned to specific band
segments (P0 to P9). The same applies to copying from
memory channels for specific band segments to
standard and expanded memory channels.
Operating data cannot be copied from memory channels
that are not registered with operating data.
MEMORY CHANNELS 9
9-3
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info