683161
116
Zoom out
Zoom in
Previous page
1/196
Next page
Configuring the Program Scan Frequency
Range
The frequency range for programmable VFO or program scan can
be registered to the memory channels from P0 to P9. Register the
start frequency and end frequency in advance to enable changes
to the frequency or scanning operation within a specific range.
For more details on program scan, please refer to Chapter 10.
1 When in the VFO mode, turn the Tuning or
[MULTI/CH] control to align the VFO frequency with
the frequency at which to start scanning.
2
Press [ M.IN] to display the Memory Channel List
screen.
3
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select the memory channel (P0 to P9) for
registering the frequency range.
4
Press F4 [M.IN] or [ M.IN] to register the start
frequency.
The start frequency is registered to “Frequency 1”.
5 Turn the Tuning or [MULTI/CH] control to align the
VFO frequency with the end frequency.
6
Press F4 [M.IN] or [ M.IN] to register the end
frequency.
The end frequency is registered to “Frequency 2” and the
transceiver exits the Memory Channel List screen.
Erasing Memory Channels
Data from a registered memory channel can be erased.
1 Press F7 [M.LIST] to display the Memory Channel
List screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a memory channel to be erased.
3 Press and hold F4 [(CLEAR)] to erase the operating
data.
When the operating data of a memory channel is erased
during operating in the memory channel mode, the
corresponding channel number will be maintained but
there will be no registered data inside.
To erase all the memory channels, perform memory
channel reset.
Registering a Memory Channel Name
Each memory channel can also be assigned with a name. The
name should contain not more than 10 characters (alphanumeric
characters and symbols).
1 Press F7 [M.LIST] to display the Memory Channel
List screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select the memory channel to be named.
3 Press F4 [NAME].
4 Use the function keys, [MULTI/CH] control or USB
keyboard to enter a name.
Enter a name that contains not more than 10 characters.
Key Behavior
F1 [SPACE] Inserts a space.
F2 [–]/ F3 [+] Selects a character.
F4 [ ]/ F5 [ ]
Moves the cursor.
F [BACK SPACE]
Deletes the character to the left of the
cursor.
F [DEL]
Deletes the character to the right of the
cursor.
F [CHAR]
Switches the type of character to edit.
Pressing the key each time switches the
selection in the following sequence:
ABC (upper case) → abc (lower case)
→ !”# (symbols) → ABC (upper case)
.
5 Press F6 [SAVE] to register the name.
Pressing F7 [CANCEL] returns the display to the Memory
Channel List screen without assigning a name to the
memory channel.
Characters that can be used are characters that can be
input using the keyboard selected in menu [9-01]
Keyboard Language (USB Keyboard).
Quick memory channels cannot be assigned with a
name.
Only memory channels that contain registered operating
data can be assigned a name.
9 MEMORY CHANNELS
9-4
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info