683161
83
Zoom out
Zoom in
Previous page
1/196
Next page
Transmitting Character Strings from the PSK
Message Memory
A message that is registered in the PSK message memory can be
transmitted as follows.
1 Press F3 [DECODE] to display the PSK
communication screen.
2 Press F5 [MEMORY] to display the PSK Message
screen.
.
3 Press F3 [CH 1] to F6 [CH 4] or F3 [CH 5] to F6 [CH
8] to select the channel that contains the message
to be transmitted.
The PSK message of the channel corresponding to the function
key is being transmitted automatically.
However, the PSK message will not be transmitted
automatically if auto TX is set to OFF.
If the channel guide is not displayed, press F2 [MORE].
Pressing F7 [NEXT] each time switches between F3 [CH
1] to F6 [CH 4] and F3 [CH 5] to F6 [CH 8].
After transmitting the PSK message that is indicated by an
<< >> display beside it, this transceiver returns
to the RX mode.
Settings Related to PSK
Configuring the PSK Tone Frequency
Configure the tone frequency when signals are received in the PSK
mode.
Configure in Menu [2-12]
PSK Tone Frequency
Setting Value 1.0/ 1.5 (default)/ 2.0 [kHz]
Reversing the Direction of Phase Change in the QPSK
Mode
When the QPSK signal received cannot be decoded correctly,
try decoding with the BFO frequency switched from the LSB
side to the USB side.
Decoding cannot be performed correctly when the BFO
frequency of the PSK signal received is in the reverse state
(frequencies of the lower and upper sidebands are reversed).
Pressing and holding the [FSK/PSK] mode key enables
reverse signals to be decoded.
PSK Operation Using a PC
For details on operation in the PSK mode using a data
communication software program that makes use of the sound
function of a PC instead of the built-in encoder and decoder
functions of this transceiver while this transceiver is configured to
the SSB-DATA mode, please refer to “PC Connection for Data
Communication” (1-4).
As audio from an external input cannot be transmitted in
the PSK mode, make use of the SSB or SSB-DATA
mode.
Alternatively, audio from an external device can also be
transmitted using the DATA VOX function.
Communication Log
The CW, RTTY and PSK communication screens can be saved
using the communication log function.
Before doing so, configure the destination for saving the data in
File Storage Location of the “USB/File Management Menu
(11-2) to “Internal Memory” or “USB Flash Drive”.
To save the data to a USB flash drive, insert a USB flash drive
formatted using this transceiver into (USB-A).
1 Set to the CW, RTTY (FSK) or PSK mode.
2 Press F3 [DECODE] to display the corresponding
communication screen.
3 Press F4 [LOG] to set the communication log
function to “On”.
Pressing F4 [LOG] each time toggles the communication log
function between ON and OFF.
“Log: On” appears on the communication screen for about
1 second when the communication log function is ON, and
“Log: Off” is displayed for about 1 second when the function
is OFF.
When the communication log function is functioning in the
ON mode, the communication log ON indicator is displayed
on the title bar.
When the communication log function is ON and the
transceiver is in the standby mode,
is displayed on the
title bar. (When there is insufficient space in the USB flash
drive or when a USB flash drive is not inserted when the
destination for saving the logs is configured to a USB flash
drive.)
The file name is made up of the date and time in
numerical format together with an underscore. The
extension of the file is based on the selection made in
Menu [2-14] CW/RTTY/PSK Log File Format. The date
and time is expressed in the following sequence:
yyyymmdd_hhmmss.
(Example)
If the date is 10:20:30 a.m., February 15, 2018:
20180215_102030.txt
The file is stored in the following folder.
CW: KENWOOD\TS-890\DECODE\CW
RTTY: KENWOOD\TS-890\DECODE\RTTY
PSK: KENWOOD\TS-890\DECODE\PSK
When removing the USB flash drive, make sure to
execute “Safely Removing the USB Flash Drive
(11-6).
Selecting a Log File Format
Select a format for the log file to be saved.
Configure in Menu [2-14]
CW/RTTY/PSK Log File
Format
Setting Value html/ txt (default)
html: Saves the log file in the html format.
txt: Saves the log file in the text format.
COMMUNICATING AIDS 5
5-27
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info