683161
82
Zoom out
Zoom in
Previous page
1/196
Next page
PSK Message Memory
Fixed phrases that are often used in the PSK mode can be
registered in advance as a message in the message memory.
Adding the auto TX and auto RX functions to the fixed phrases
enables messages to be sent out via simple operation.
Up to 8 types of messages can be registered.
Registering Messages
1 Press F3 [DECODE] to display the PSK
communication screen.
2 Press F5 [MEMORY] to display the PSK Message
screen.
.
3
Press F3 [ ]/ F4 [ ] or turn the [MULTI/CH]
control to select the channel for registering the
message.
If F3 [
] and F4 [ ] are not displayed in the key guide,
press F2 [MORE] to toggle the key guide display.
4 Press F5 [MSG].
.
5 Use the function keys, [MULTI/CH] control or USB
keyboard to enter a character string.
Key Behavior
F1 [SPACE] Inserts a space.
F2 [–]/ F3 [+] Selects a character.
F4 [ ]/ F5 [ ]
Moves the cursor.
F [BACK SPACE]
Deletes the character to the left of the
cursor.
F [DEL]
Deletes the character to the right of the
cursor.
F [CHAR]
Switches the type of character to edit.
Pressing the key each time switches the
selection in the following sequence:
ABC (upper case) → abc (lower case)
→ !”# (symbols) → ABC (upper case)
Pressing F7 [CANCEL] discards the content that is currently
being edited and exits the character string input mode.
6 Press F6 [SAVE] to save the edited message.
Configuring Auto TX/RX for the PSK Message
Memory
The transmission and reception behavior can be configured when
a PSK message memory channel is selected.
Auto TX places this transceiver in the TX mode before
transmitting a message when a message memory channel is
selected, and maintain the TX mode after all messages have
been sent out.
For auto RX, pressing [F12] after selecting a message memory
channel for transmission places this transceiver in the TX mode.
When the message is sent out, this transceiver is automatically
restored to the RX mode.
Combining auto TX and auto RX enables both transmission and
reception to be performed automatically.
1 Press F3 [DECODE] to display the PSK
communication screen.
2 Press F5 [MEMORY] to display the PSK Message
screen.
3
Press F3[ ]/ F4[ ] or turn the [MULTI/CH]
control to select the channel containing the
message for auto TX/RX.
4 Press F6 [AUTO.TX] to set auto TX to ON.
<< >> is displayed to the right of the PSK message.
.
When auto TX is set to OFF, the << >> display
goes off, and the PSK message of the channel is temporarily
placed in the character string buffer but not transmitted
automatically.
5 Press F7 [AUTO.RX] to set auto RX to ON.
<< >> is displayed to the right of the PSK message.
When auto RX is set to OFF, the << >> display
goes off, and this transceiver is not restored to the RX mode
after the PSK message for the channel has been sent out.
To sent a PSK message for which “AUTO TX” is set to
ON, select the channel in which the PSK message is
stored. Check to ensure that the character string (PSK
message) is forwarded to the character string buffer,
followed by pressing [F12] on the USB keyboard.
To switch this transceiver to the RX mode after
transmitting a PSK message for which “AUTO RX” is set
to OFF, press [F12] on the USB keyboard after the PSK
message has been sent out.
5 COMMUNICATING AIDS
5-26
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info