683161
81
Zoom out
Zoom in
Previous page
1/196
Next page
Switching between PSK31 and PSK63
This transceiver supports PSK31 as well as PSK63. The latter has
a transfer rate that is twice that of the BPSK mode. Perform the
following step to toggle between PSK31 and PSK63.
Press F3 [31/63].
It is possible to toggle between BPSK31 and BPSK63 or
between QPSK31 and QPSK63. The display to the right of the
status bar toggles between << >> and << >>
when the mode is switched.
This is fixed at BPSK when the PSK63 mode is selected.
Transmitting Character Strings from USB Keyboard
A commercially available USB keyboard can be used to input and
transmit character strings.
Transmitting the Input Character String Immediately
1
Connect the USB keyboard to (USB-A).
2 Press F3 [DECODE] to display the PSK
communication screen.
3 Press [F12] on the USB keyboard to switch this
transceiver to the TX mode.
The [BUSY/TX] LED lights up in red, and << >> is
displayed in the status bar.
4 Enter a character string using the USB keyboard.
The input character string is displayed in the character string
buffer and transmitted immediately.
In the character string buffer, the color of the individual
characters change successively once they are transmitted.
Characters that have been transmitted appear successively
in the TX/RX details display area.
5 Press [F12] on the USB keyboard to switch this
transceiver to the RX mode.
If there remain characters in the character string buffer
that are not transmitted when [F12] is pressed in step 5,
<<
>> is displayed in the status bar. After
transmission of all the character strings is complete, the
transceiver switches to the RX mode and the light of the
[BUSY/TX] LED and << >> display go off.
Temporarily Placing Character Strings in the
Character String Buffer before Transmission
1
Connect the USB keyboard to (USB-A).
2 Press F3 [DECODE] to display the PSK
communication screen.
3 Enter a character string using the USB keyboard.
The input character string is stored temporarily in the character
string buffer.
4 Press [F12] on the USB keyboard to send out the
character string that is stored in the character
string buffer.
Upon entering the TX mode, the [BUSY/TX] LED lights up in
red, and << >> is displayed in the status bar.
In the character string buffer, the color of the individual
characters change successively once they are transmitted.
5 Press [F12] on the USB keyboard to switch this
transceiver to the RX mode.
If there remain characters in the character string buffer
that are not transmitted when [F12] is pressed in step 5,
<<
>> is displayed in the status bar. After
transmission of all the character strings is complete, the
transceiver switches to the RX mode and the light of the
[BUSY/TX] LED and << >> display go off.
Pressing [ESC] while transmission of the character
strings is in progress switches this transceiver to the RX
mode. Transmission of the character strings stops, and
character strings in the character string buffer that are
not yet transmitted are cleared.
Time stamp and frequency information can be added to
the TX or RX data that is displayed in the TX/RX details
display area.
Sending a character string using the USB keyboard while
the TX/RX display is paused by pressing F3 [PAUSE]
cancels the paused state.
The character strings that can be placed temporarily in
the character string buffer can contain a maximum of
4300 characters.
Characters and symbols that can be input using a USB
keyboard are as follows.
A
B C D E F G H I J K L M N O
P Q R S T U V W E X Y Z
0 1 2 3 4 5 6 7 8 9
a b c d e f g h i j k l m n o
p q r s t u v w x y z
À Á Â Ã Ä Å Æ Ç È É Ê Ë Ì Í Î
Ï Ð Ñ Ò Ó Ô Õ Ö Ø Ù Ú Û Ü Ý Þ
à á â ã ä å æ ç è é ê ë ì í î
ï ð ñ ò ó ô õ ö ø ù ú û ü ý þ
ÿ ß
! " # $ % & ( ) * + , - . /
: ; < = > ? @ [ \ ] ^ _ ` { |
} ~ ¡ ¢ £ ¤ ¥ ¦ § ¨ © ª « ¬ ®
¯ ° ± ² ³ ´ µ ¸ ¹ º » ¼ ½
¾ ¿ No ÷
Space Line Break
The chart above shows the characters and symbols that can be
input when “English” is selected in Menu [9-01]. To input
Japanese characters, please download and refer to the
Japanese instruction manual from our website.
COMMUNICATING AIDS 5
5-25
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info