683161
61
Zoom out
Zoom in
Previous page
1/196
Next page
Copying Equalizer Data
The customized equalizer characteristics can be copied to one of
the options from “User 1” to “User 3”.
1
Press and hold F [RX EQ] to display the RX
Equalizer configuration screen.
2
Press F2[ ] / F3[ ] to select the equalizer to
save.
Pressing F4 [ADJ] on the RX Equalizer screen displays the RX
Equalizer Adjustment screen. Equalizer data can be copied from
either the RX Equalizer screen or RX Equalizer Adjustment screen.
3
Press F5 [COPY].
A message appears prompting you to confirm the destination
to copy the equalizer characteristics.
Pressing F7 [CANCEL] ends the equalizer data copy
operation without copying and restores the display to the RX
Equalizer screen or RX Equalizer Adjustment screen.
.
4
Press F2 [USER 1], F3 [USER 2] or F4 [USER 3] to
specify the destination to copy the data to.
The equalizer selected in step 2 is copied to “USER 1”, “USER
2” or “USER 3”.
After copy is complete, the message to confirm the
destination for copying the equalizer characteristics
disappears and the display is restored to the RX equalizer
screen or RX equalizer adjustment screen.
5
Press and hold F [RX EQ] or press [ESC] to end the
process.
Saving Equalizer Data
Multiple sets of customized DSP equalizer settings data can be
created and saved.
Before doing so, configure the destination for saving the data in
File Storage Location of the USB/File Management Menu” to
“Internal Memory” or “USB Flash Drive”. (See 11-2)
To save the data to a USB flash drive, insert a USB flash drive
formatted using this transceiver into (USB-A).
1 Press and hold F [RX EQ] to display the RX
Equalizer configuration screen.
2
Press F2[ ] / F3[ ] to select the equalizer to
save.
3 Press F7 [SAVE].
A message indicating that saving is complete is displayed.
.
4 Press F4 [OK].
5 Press and hold F [RX EQ] or press [ESC] to end the
process.
The saved file is named in the “yyyymmdd_hhmmss”
format. The extension of the saved file is “equ”.
(Example) If the date is 10:20:30 a.m., February 15, 2018:
20180215_102030.equ
The name of the destination folder is as follows. (The
name varies depending on the destination for saving
files.)
USB flash drive: “KENWOOD\TS-890\SETTINGS
\RX_EQ”
Built-in memory: “SETTINGS\RX_EQ”
When removing the USB flash drive, make sure to
execute “Safely Removing the USB Flash Drive
(11-6).
Reading Equalizer Data
RX DSP equalizer data that is saved in the internal memory or USB
flash drive can be read.
To read the data from a USB flash drive, insert the USB flash
drive containing the RX equalizer data into (USB-A).
1 Press and hold F [RX EQ] to display the RX
Equalizer configuration screen.
2
Press F2[ ]/ F3[ ] to select the equalizer to
read.
3 Press F6 [READ] to display the screen for selecting
the file to read.
.
4 Select the file to read.
To read data from the internal memory, press F7 [INT.MEM].
To read data from the USB flash drive, press F7
[USB.MEM]. (If a USB flash drive is not connected, a message
screen will appear prompting you to get ready the USB flash
drive.)
Pressing F5 [NAME] allows the file name to be changed.
Pressing F6 [DELETE] displays a message to confirm
deletion of the file. Pressing F4 [OK] deletes the file.
5
Press F2[ ]/ F3[ ] to select the RX equalizer
data file to read.
Alternatively, the RX equalizer data file can also be selected by
turning the [MULTI/CH] control.
6 Press F4 [OK].
After the RX equalizer data has been read successfully, a
message indicating that reading is complete is displayed.
7 Press F4 [OK] again.
8 Press and hold F [RX EQ] or press [ESC] to end the
process.
COMMUNICATING AIDS 5
5-5
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info