683161
60
Zoom out
Zoom in
Previous page
1/196
Next page
RX Equalizer
This function allows the sound quality to be altered by adjusting
the characteristics of the RX frequency. 6 types of RX equalizer
are available, which can be configured separately for each mode.
A set of equalizer characteristics can be configured freely for each
of the options between “User 1” and “User 3”.
Turning ON/OFF RX Equalizer
Press F [RX EQ].
Pressing F [RX EQ] each time toggles the RX equalizer
between ON and OFF.
Selecting an RX Equalizer Characteristic
1
Press and hold F [RX EQ] to display the RX
Equalizer configuration screen.
.
2
Press F2[ ] / F3[ ] or turn the [MULTI/CH]
control to select an equalizer characteristic.
The selected equalizer characteristic turns on.
Characteristic
Purpose
High Boost 1 (HB1)
Boosts the high frequency component. This is
effective for audio sound that contains a low
frequency component.
High Boost 2 (HB2)
Boosts the high frequency component. The low
frequency attenuation level for this option is half
of that of the High Boost 1 option.
Formant Pass (FP)
This option attenuates frequency components
that is outside the audio bandwidth so that the
audio can be heard more clearly.
Bass Boost 1 (BB1)
Boosts the low frequency component. This is
effective for audio sound that contains a high
frequency component.
Bass Boost 2 (BB2)
Boosts the low frequency component. The low
frequency is further boosted compared to Bass
Boost 1.
Flat (FLAT) This option has a flat frequency response.
User 1 (U1) Frequency characteristics can be adjusted
according to the user’s preferences and stored
in the options between User 1 and User 3. The
flat frequency characteristic is selected in the
default setting.
User 2 (U2)
User 3 (U3)
3
Press and hold F [RX EQ] or press [ESC] to end the
process.
.
RX Characteristic Curve
Frequency
(Hz)
-30
-25
10
0
10
3
10
2
10
1
0
5
-5
-10
-20
-15
10
OFF
HB1
HB2
FP
BB1
BB2
FLAT
When the RX DSP equalizer is set to ON, the effect
(HB1/ HB2/ FP/ BB1/ BB2/ FLAT/ U1/ U2/
U3) is displayed at the lower end of the key guide.
When the RX DSP equalizer is OFF, OFF is displayed
at the lower end of the key guide.
Adjusting the Equalizer Characteristics
The equalizer characteristics can be customized according to the
user’s preferences. Also, the customized characteristics can be
stored as user-defined settings.
1
Press and hold F [RX EQ] to display the RX
Equalizer configuration screen.
2
Select an equalizer characteristic.
3
Press F4 [ADJ] to display the RX Equalizer
Adjustment screen.
.
4
Press F3[ ] / F4[ ] to select the frequency to
adjust.
5
Press F5 [–]/ F6 [+] or turn the [MULTI/CH] control
to adjust the frequency level.
Touching a point on the RX Equalizer Adjustment screen
selects the corresponding band and changes the frequency
to the selected level.
An alternative way is to touch a rough point followed by fine-
tuning in steps 3 and 4.
Pressing and holding F2 [(RESET)] resets all the frequency
levels to the default setting.
6
Press and hold F [RX EQ] or press [ESC] to end the
process.
Besides the User 1 to User 3 options, the equalizer
characteristics of the other options can also be altered
on the RX Equalizer Adjustment screen.
If the configured level of the RX DSP equalizer deviates
from the configured level of the adjacent frequency, the
desired amount of attenuation may not be obtained.
5 COMMUNICATING AIDS
5-4
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info