683161
63
Zoom out
Zoom in
Previous page
1/196
Next page
Transmission in Data Mode
Transmission via PTT Switch, SS Terminal and SEND
Switch transmission by making use of the [PTT] switch on the
microphone, SS terminal of the REMOTE connector and [SEND]
on the front panel. Under normal circumstances, the microphone
audio is transmitted via this operation.
This transceiver continues to transmit signals while [PTT] on
the microphone is pressed and held down.
This transceiver transmits signals when the SS terminal of the
REMOTE connector is short-circuited to GND.
Pressing [SEND] each time toggles between transmission and
reception.
Transmission via DATA PTT or DATA SEND
DATA PTT (PKS terminal of ACC 2 connector) or the PF key that
is assigned with “DATA SEND” is used to switch between
transmission and reception. For more details, please refer to “PF
Keys (Programmable Function Keys)” (16-2).
This function comes in handy when transmitting audio or data from
an external device.
This operation transmits normal audio signals or audio signals that
are input to the ANI terminal of the ACC 2 connector. A different
audio path can be specified. For more details, please refer to
Configuration of the Input Path of TX Audio” (8-1).
This transceiver continues to transmit signals while DATA PTT
(PKS terminal of the ACC 2 connector) is short-circuited to
GND.
Pressing the PF key that is assigned with “DATA SEND” toggles
between transmission and reception.
RIT/XIT
RIT (Receiver Incremental Tuning)
RIT is a function for fine-tuning only the RX frequency in 10 Hz
steps within the ±9.99 kHz range without altering the TX frequency.
This is used such as when the TX frequency of the station that this
transceiver is communicating with has become slightly deviated.
When the FINE mode is ON, the offset frequency of RIT
switches to a step size of 1 Hz. RIT functions in the same way
in all modes as well as when VFO or the memory channel mode
is in use.
1 Press [RIT].
The [RIT] LED lights up and the RIT offset frequency is
displayed.
2 Turn the [RIT/XIT] control.
Fine-tune the RX frequency for RIT.
To clear the offset frequency for RIT, press [CL]. The RIT
offset frequency value is reset to 0.
3 Press [RIT] to end the process.
RIT is turned off. The RX frequency is restored to the value prior
to performing step 1.
RIT Shift
This is a function for setting the frequency adjusted with RIT to a
RX band.
Press and hold [RIT].
The RX frequency that is adjusted using RIT is set to an RX
band. The RIT frequency is then cleared and the RIT function
is turned off.
XIT (Transmitter Incremental Tuning)
XIT is a function that can be used to fine-tune the TX frequency in
10 Hz steps within the ±9.99 kHz range without altering the RX
frequency.
When the FINE mode is ON, the offset frequency of XIT
switches to a step size of 1 Hz.
1 Press [XIT].
The [XIT] LED lights up and the XIT offset frequency is
displayed.
2 Turn the [RIT/XIT] control.
Fine-tune the TX frequency for XIT.
To clear the offset frequency for XIT, press [CL]. The XIT
offset frequency value is reset to 0.
3 Press [XIT] to end the process.
XIT is turned off. The TX frequency is restored to the value prior
to performing step 1.
XIT Shift
This is a function for shifting from operation using XIT to the split
mode at one touch.
Press and hold [XIT].
When the TX frequency that is adjusted using XIT is set to a TX
band, the operation switches to the split mode at the same time.
The XIT frequency is then cleared and the XIT function is turned
off.
If the frequency is changed in the entry mode, the
RIT/XIT function is automatically turned off.
COMMUNICATING AIDS 5
5-7
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info