509864
7
Zoom out
Zoom in
Previous page
1/16
Next page
6
L-Audio-R119. Group1 RCA audio output port
Audio1
20. AES/EBU and Balance Audio output port1 (need to use the RS232-to-XRL converting
cable in accessories)
TUNER OUT21. Tuner signal loop through output port
TUNER IN22. Tuner signal input
3.5 POWER ON THE DEVICE
Be sure the device is mounted into the rack properly and rmly, and the signal cables are connected well, then
power can be applied to the device. The main socket and fuse are located at the rear panel of the device.
When the device is powered on, verify that the display shows the following message:
Digital TV Processor (factory default unit-name)
IP: 10.10.60.148 (factory default IP Address for LAN access)
If no message is shown in the display or there is not light in the display, the device is defective and has to be
returned for servicing.
4. Navigating the Front Panel
POWER1. Power indicator, green light means power is OK
TUNER LOCK2. Tuner lock indicator, green light means signal is locked; if there is no light, which
means no signal input or wrong parameters setting.
ALARM3. Alarm indicator
LCD4. 2 × 20 character LCD
Operation button5. <LEFT> <UP> <DOWN> <RIGHT> <ENTER> <EXIT> buttons
<UP> <DOWN> buttons are used to up/down pages of menu or increase/decrease
value when edit numbers
<LEFT> <RIGHT> buttons are used to move cursor
<ENTER> button is used to enter sub menu or conrm operation
<EXIT> button is used to return previous menu or cancel operation
Common Interface6. PCMCIA Module slot
5. Menu Structure and Operating the
Device
The menu structure of the device is showed in below gure. After initialization is completed, press (ENTER)
button to enter main menu:
(1) Input Setup Set input parameters
(2) Output Setup Set output parameters
(3) System Set system parameters
Main Menu
Inputs
Outputs System
IDLV-5000P Professional MPEG-2/MPEG-4 AVC SD/HD Integrated Receiver Decoder
Enter Exit
Power T u ner Lock Alarm
1 2 3 4 5 6
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDLV-5000P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDLV-5000P in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info