509864
14
Zoom out
Zoom in
Previous page
1/16
Next page
En
13
Decoder version:• show Decoder version
FPGA version:
• show FPGA version
TS/IP IN (or OUT) NIOS:• it’s changed when TS/IP board is set to “IP Out” or “IP IN”.
TS/IP IN (or OUT) FPGA: • it’s changed when TS/IP board is set to “IP Out” or “IP IN”.
5.3.5 Factory Setting
All the user congurable parameters will be set to the factory default settings, including IP address and the unit
name.
5.3.6 Optional Function
There are two submenus:
1. External Board Type: Press <ENTER>-key to active the menu, use <UP> <DOWN> keys to congure the
TS/IP functional block as ‘IP In or ‘IP Out’ or ‘No Exist’, and the option is exclusive. Press <ENTER> key to
conrm or to scrap by pressing <EXIT> key.
After the operation, you need reboot the unit to valid the conguration.
IP In: the TS/IP port is congured as input, you can feed transport stream over IP into the unit.
The menu ‘Ethernet’ will be showed under the inputs menu.
IP Out: the TS/IP port is congured as output, you can set the transport stream over IP output to the IP network.
The menu ‘Ethernet’ will be showed under the outputs menu.
No Exist: the TS/IP port is invalid. Therefore the menu ‘Ethernet’ will not be showed anywhere.
2. Mux Function: Press <ENTER> key to active the menu, use <UP> <DOWN> keys to congure the Mux
functional block as ‘Enable’ or or ‘Disable’. Press <ENTER> key to conrm or to scrap by pressing <EXIT> key.
5.3.7 Machine Type
This setting is reserved for factory-setting, and you are not allowed to access this menu.
6. FAQ
1. Why is there nothing in the LCD?
Answer: Please check whether the power supply is connected well rst. If not, insert it well and turn on the
device. If there is still nothing displayed on the LCD, then the unit may be damaged, please contact the agent for
technical support.
2. Why can the DVB-S2 signal not be locked?
Answer: Please ensure whether the input cable in connected well rst. If not, insert it well. If it is connected well,
please check whether all the necessary parameters are set properly. If not, please set the parameters properly.
If the signal still cannot be locked, please check whether the quality of the signal is out of the threshold of the
Tuner. If not, then the device might be damaged, please contact the agent for support.
3. Why can the ASI not be locked?
Answer: Please make sure the BNC cable is connected well and there are programs transmitted to the unit via
the BNC cable.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDLV-5000P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDLV-5000P in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info