670434
75
Zoom out
Zoom in
Previous page
1/96
Next page
11-8
Network Name
When you remotely control the IC-R8600 using the
optional RS-R8600 (future product), enter a network
name.
L“.” (period) cannot be used for the rst character.
LPush
to change the keyboard type.
LRefer to page 1-7 for the character entering.
Network Control (Valid after Restart) (Default: OFF)
When you remotely control the IC-R8600 using the op-
tional RS-R8600 (future product), select “ON.”
• OFF: Turn OFF the function.
• ON: Turn ON the function.
LThis setting takes effect after restart.
Power OFF Setting (for Remote Control)
(Default: Shutdown only)
When you remotely control the IC-R8600 using the op-
tional RS-R8600 (future product), select “ON.”
• Shutdown only: Shuts down immediately.
Standby/Shutdown: Displays the SHUTDOWN dia-
log before shutting down.
Control Port (UDP) (Valid after Restart)
(Default: 50001)
When you remotely control the IC-R8600 using the op-
tional RS-R8600 (future product), set a port number for
the control signal transfers between the IC-R8600 and
the remote station.
• Set the same port number to the PC.
LThis setting takes effect after restart.
Serial Port (UDP) (Valid after Restart)
(Default: 50002)
When you remotely control the IC-R8600 using the op-
tional RS-R8600 (future product), set a port number for
the serial data transfers between the IC-R8600 and the
remote station.
LThis setting takes effect after restart.
Audio Port (UDP) (Valid after Restart)
(Default: 50003)
When you remotely control the IC-R8600 using the op-
tional RS-R8600 (future product), set a port number for
the audio signal transfers between the IC-R8600 and
the remote station.
LThis setting takes effect after restart.
Network (Continued)
Internet Access Line (Valid after
Restart
)
(Default: FTTH)
When you remotely control the IC-R8600 using the op-
tional RS-R8600 (future product), set the port number
for the audio signal transfers between the IC-R8600
and the remote station.
• Set the same port number to the remote station.
LThis setting takes effect after restart.
Network user1 >
Network User1 ID
Network user2 > Network User2 ID
When you remotely control the IC-R8600 using the op-
tional RS-R8600 (future product), enter a user name.
LPush to change the keyboard type.
LRefer to page 1-7 for the character entering.
Network user1 >
Network User1 Password
Network user2 > Network User2 Password
Enter a password for each user.
LPush to change the keyboard type.
LRefer to page 1-7 for the character entering.
Network user1 >
Network User1 Administrator
Network user2 > Network User2 Administrator
(Default: NO)
Sets the user as the administrator.
Only authorized users can disconnect the communi-
cation between the remote IC-R8600 and the optional
RS-R8600 (future product).
• NO: Not authorized.
YES: Authorized.
Network Radio Name
(Default: IC-R8600)
When you remotely control the IC-R8600 using the op-
tional RS-R8600 (future product), enter a nickname.
LPush to change the keyboard type.
LRefer to page 1-7 for the character entering.
11
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info