670434
73
Zoom out
Zoom in
Previous page
1/96
Next page
11-6
Connectors (Continued)
USB (Rear) > AF SQL (Default: OFF (OPEN))
Selects whether or not to output the audio from [USB] on
the rear panel, according to the squelch and signal levels.
OFF(OPEN):
The squelch is always opened regardless
of the squelch and signal levels.
ON:
The squelch opens and closes, according
to the squelch and signal levels.
USB (Rear) > AF Beep/Speech... Output
(Default: OFF)
Sets the Beep and Speech audio output status of
[USB] on the rear panel.
OFF: The beep and speech audio are not output
from [USB] on the rear panel.
• ON: The beep and speech audio are output from
[USB] on the rear panel.
USB (Rear) > IF Output Level (Default: 50%)
Sets the IF (12 kHz) output level of [USB] on the rear panel.
Range: 0 ~ 100%
USB (Rear) > Serial Function (Default: FSK Decode)
Selects the signal output from [USB] on the rear panel.
FSK Decode: An FSK decoded signal is output.
• D-STAR Data: A D-STAR data is output.
USB (Rear) > FSK Decode Baud Rate (Default: 9600)
Selects the data transfer rate (Baud rate) of decoded
FSK signals from [USB] on the rear panel.
Options: 4800, 9600, 19200 or 38400 (bps)
USB (Rear) > D-STAR Data Baud Rate (Default: 9600)
Selects the data transfer rate (Baud rate) of decoded
D-STAR data
from [USB] on the rear panel.
Options: 4800 and 9600 (bps)
LAN > Output Select (Default: AF)
Selects the signal output from [LAN].
AF: The demodulated AF signal is output.
IF: A 12 kHz IF signal is output.
L You can listen to the Digital Radio Mondiale (DRM)
broadcast with an application software receiver that
is installed into your PC.
LAN >
AF SQL (Default: OFF (OPEN))
Selects whether or not to output the audio from [LAN],
according to the squelch and signal levels.
OFF(OPEN):
The squelch is always opened regardless
of the squelch and signal levels.
ON:
The squelch opens and closes, according
to the squelch and signal levels.
LAN > AF Speech Output (Default: OFF)
Sets the Speech audio output status of [LAN].
OFF: The speech audio is not output from [LAN].
• ON: The speech audio is output from [LAN].
L You should set the “AF SQL” item to “AF.”
CI-V >
CI-V Baud Rate (Default: Auto)
Selects the CI-V data transfer rate.
Options: 4800, 9600, 19200 (bps) or Auto
L When “Auto” is selected, the baud rate is automatically set,
according to the data rate of the connected controller.
CI-V >
CI-V Address (Default: 96h)
Selects the CI-V address.
Range: 02h ~ 96h ~ DFh
L“96h” is the default address of the IC-R8600.
CI-V >
CI-V Transceive (Default: ON)
Turns the Transceive function ON or OFF.
OFF: The status is not output.
• ON: The status is output.
CI-V >
USB/LAN→REMOTE Transceive Address
(Default: 00h)
Sets the address used to remotely control the receiver
using the optional RS-R8600 (future product), through
the [USB] or [LAN] port.
The external equipment control signal is output from
the [REMOTE] port.
Range: 00h ~ DFh
CI-V > CI-V USB (Front) Baud Rate (Default: Auto)
Selects the CI-V data transfer rate for [USB] on the
front panel.
Options: 4800, 9600, 19200, 38400, 57600, 115200
(bps) or Auto
L When “Auto” is selected, the baud rate is automatically set
according to the data rate of the connected controller.
CI-V >
CI-V USB (Front) Echo Back (Default: OFF)
Turns the Data Echo Back function ON or OFF, when
remotely controlling through the [USB] CI-V port.
OFF: Turns OFF the function.
• ON: Turns ON the function.
TIP: When multiple devices are connected.
The default transceive address is “00h.” To control
dedicated equipment when several devices are
connected, set the same CI-V address.
11
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info