670434
77
Zoom out
Zoom in
Previous page
1/96
Next page
11-10
Time Set
Date/Time > Date (Default: 2000/01/01)
Sets the date* (Year/Month/Day).
Settable range: 2000/01/01 ~ 2099/12/31
LThe day of the week is automatically set.
L If the NTP Function is ON and receiver is connected to
Internet, these items are automatically set.
Date/Time >
Time (Default: 0:00)
Sets the current time.
Settable range: 0:00 ~ 23:59
LThe time is displayed in the 24 hour format.
L If the NTP Function is ON and receiver is connected to
Internet, these items are automatically set.
Date/Time >
<<NTP TIME SYNC>>
Touch to synchronize the internal clock to the NTP server.
Automatically obtains the current time from the NTP server.
Date/Time >
NTP Function (Default: ON)
Automatically obtains the current time from the NTP server.
• OFF: Turn OFF the function.
ON: Use the function. (An internet access is necessary.)
Date/Time
> NTP Server Address
(Default: time.nist.gov)
Sets the NTP server address.
LDo not change this setting, unless it is necessary.
LRefer to page 1-7 for the character entering.
UTC Offset (Default: + 0:00)
Sets the UTC offset time.
Range: –14:00 to +14:00 (in 5 minute steps)
SD Card
Load Setting
Selects the saved data le to load.
L See “Using An SD Card” in Section 7 for data load details.
Save Setting
Saves the setting data onto an SD card.
L See “Using An SD Card” in Section 7 for data write details.
SD Card Info
Displays the SD card capacity and the time remaining
for recording.
Screen Capture View
Displays the selected screen capture.
L See “Screen Capture function” (p. 5-11) for details.
Firmware Update
Enters the Firmware Update mode.
L See “Updating the rmware” (p. 13-1) for details.
Format
Formats the SD card.
L See “Formatting an SD card” (p. 7-2) for details.
Unmount
Unmounts the SD card.
SD Card (Continued)
Others
Information > Version
Displays the rmware version.
Clone > Clone Mode
Touch to enter the cloning mode.
L The cloning mode is cancelled on restart.
Touch Screen Calibration
Touch to adjust the touch screen.
L
Touch the white dots that sequentially appears on the screen.
<<BER Measurement Start/Stop>>
Touch to enter or quit the BER Measurement mode.
“BER” is displayed while in the measurement mode.
Push to select the testing signal type (Clock/Data or
UART) and measurement mode (General or P25 specic).
Reset > Partial Reset
Touch to return all the settings to their factory defaults
except the memory channels.
L See “Resetting” (p. 12-2) for details.
Reset >
All Reset
Touch to return all the settings to their factory defaults,
and clears all the memory channels.
L See “Resetting” (p. 12-2) for details.
MENU
» SET > Time Set
MENU
» SET > Time Set
NOTE:
Before you remove a card when the receiver is ON,
be sure to electrically unmount it (p. 7-1). Otherwise
the data may be corrupted or deleted.
MENU
» SET > Other
11
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info