670164
70
Zoom out
Zoom in
Previous page
1/104
Next page
8
65
SCAN OPERATION
• Channels
For programmed scan:
Program scan edge frequencies into scan edge mem-
ory channels P1 and P2. (p. 66)
For memory scan:
Program two or more memory channels except scan
edge memory channels.
• Scan resume ON/OFF
You can select the scan to resume or cancel when
detecting a signal in the set mode.
Scan resume ON/OFF must be set before operating a
scan. See p. 78 for ON/OFF setting and scan resume
condition details.
• Scan speed
Scan speed can be selected from 2 levels, high or
low, in the set mode. See p. 78 for details.
• Squelch condition
Scan starts with squelch open
For programmed scan:
When tuning step is 1 kHz or less:
The scan continues until it is stopped manually with
pushing
SCAN
, and does not pause* even if signals
are detected.
* The scan is paused when the squelch is closed and
then opened (scan resumes after 10 sec. has passed
when the scan resume is ON; scan is cancelled when
OFF).
When tuning step is more than 5 kHz:
The scan pauses on each step when the scan
resume is ON; not applicable when OFF.
For memory scan:
Scan pauses on each channel when the scan resume
is ON; not applicable when OFF.
Scan starts with squelch closed
Scan stops when a signal is detected.
If you set scan resume ON in the set mode, the scan
pauses for 10 sec. when detecting a signal, then
resumes. When a signal disappears while scan is
paused, scan resumes 2 sec. later.
N
OTE: If the [RF/SQL] control function is set as
AUTO,the squelch is always open in SSB, CW
and RTTY modes. (pgs. 4, 30, 75)
Scan types
Preparation
PROGRAMMED SCAN
Repeatedly scans between two scan edge frequencies
(scan edge memory channels P1 and P2).
This scan operates in VFO mode.
Scan
Scan edge P1 or P2 Scan edge P2 or P1
Jump
This scan operates in memory mode.
MEMORY SCAN
Repeatedly all programmed memory channels that
are not blank.
Mch 1 Mch 5
Mch 2 Mch 3 Mch 4
Mch 6Mch 7Mch 199
BLANK
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7200 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info