670164
68
Zoom out
Zoom in
Previous page
1/104
Next page
63
■Frequency copying
The frequency and operating mode in a memory
channel can be copied to the VFO.
D Copying in memory mode
This is useful for copying a memory channels con-
tents (frequency and operating mode) to a VFO while
operating in memory mode.
This is useful when searching for signals around a
memory channel frequency.
NOTE: While operating in VFO mode, pushing and
holding
V/M
for 1 sec. also copy the selected
memory channel’s contents (frequency and oper-
ating mode) to a VFO.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
Displayed frequency and mode are copied.
Programmed frequency and mode in the mem-
ory channel are not copied, and they remain in
the memory channel.
q
Push
V/M
to select memory mode.
w
Rotate [M-CH] to select the desired memory
channel to be copied.
If the RIT control indicator lights orange, push
M-CH/RIT
SET
. (p. 61)
• Set the frequency or operating mode if required.
appears if the selected memory channel is a
blank channel (and does not have contents). In this
case copying is not possible.
Channel decreases
Channel increases
RIT control indicator
goes out
e Push and hold
V/M
for 1 sec. to copy the fre-
quency and operating mode.
• 3 beeps are emitted when the copying is successful.
• Displayed frequency and operating mode are copied.
r To return to VFO mode, push
V/M
.
Copied frequency and operating mode appear in the
display.
You can return to VFO mode before copying
the frequency and operating mode in step e.
[EXAMPLE]: Copying contents of memory 16.
Operating frequency
Contents of memory 16
: 14.020 MHz/CW
: 14.018 MHz/CW
V/M
1
1.8
Push and hold for 1 sec.,
then push .
V/M
1
1.8
Rotate [M-CH]
7
MEMORY OPERATION
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7200 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info