670164
67
Zoom out
Zoom in
Previous page
1/104
Next page
62
7
MEMORY OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■Memory programming
Memory channel programming can be performed
either in VFO mode or in memory mode.
D Programming in VFO mode
q Push
V/M
to select VFO mode.
w Rotate [DIAL], and push
MODE
to set the de-
sired frequency and operating mode.
e
Rotate [M-CH] to select the desired memory
channel.
If the RIT control indicator lights orange, push
M-CH/RIT
SET
. (p. 61)
appears if the selected memory channel is a
blank channel (one without any stored frequencies).
Channel decreases
Channel increases
RIT control indicator
goes out
r Push and hold
MW
for 1 sec. to program the
displayed frequency and operating mode into the
selected memory channel.
3 beeps are emitted when memory programming is
successful.
[EXAMPLE]:
Programming 7.088 MHz/LSB
into ch 12.
Push
VFO mode
Rotate [DIAL]
Push
Rotate [M-CH]
Push and hold
7.088 MHz/LSB are programmed into ch 12.
D Programming in memory mode
q Push
V/M
to select memory mode.
w
Rotate [M-CH] to select the desired memory
channel.
If the RIT control indicator lights orange, push
M-CH/RIT
SET
. (p. 61)
Memory channel contents appear in the display.
Channel decreases
Channel increases
RIT control indicator
goes out
e Rotate [DIAL], and push
MODE
to set the de-
sired frequency and operating mode.
To program a blank channel, use direct frequency
entry with the keypad. (p. 25)
r Push and hold
MW
for 1 sec. to program the
displayed frequency and operating mode into the
memory channel.
3 beeps are emitted when memory programming is
successful.
[EXAMPLE]:
Programming 21.280 MHz/USB
into ch 18.
Push
Memory mode
Rotate [DIAL]
Push
Rotate [M-CH]
Push and hold
21.280 MHz/USB are programmed into ch 18.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7200 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info