436321

HP designjet 8000s cutter blade kit Manual

18
Zoom out
Zoom in
Previous page
1/230
Next page
●
Do not operate printer within 8 meters (25 feet) of open flames, sparks, or other sources of ignition.
Do not smoke within 8 meters (25 feet) of the printer.
●
Install and operate the printer in a well-ventilated area.
●
The printer installation must meet all applicable regulations on the emissions of volatile organic
compounds in the workplace. HP recommends that installations use an ink vapor extraction and
exhaust system or an HP Air Purification System. Before installing a system exhausting ink vapors to
the outside atmosphere, consult with your local air quality control authorities.
●
Avoid contact between ink and skin, eyes, and clothing.
●
Immediately wash skin with soapy water.
●
Remove clothing soaked with ink from contact with skin.
●
Use an approved eye wash station if ink is splashed into eyes and consult a doctor if necessary.
If an approved eye wash station is unavailable, flush eyes with cold water and consult a doctor
if necessary.
●
Do not swallow ink. If swallowed, do not induce vomiting and seek immediate medical attention.
●
Keep ink cartridges, cleaning kits, and waste ink bottles out of the reach of children.
●
Be sure all operators are trained in the use of emergency equipment such as eye wash stations and
fire extinguishers and know where they are located.
General cautions
●
Handle media rolls with care. They can be heavy and difficult to move in confined spaces. In some
cases, two people should move and install media rolls. Dropping a media roll could cause personal
injury or damage to the printer.
●
Allow and maintain adequate space around printer for immediate access to safety equipment such
as eye wash stations, fire extinguishers, glove and safety glass dispensers, and fireproof waste
storage containers.
●
Treat any media, used cleaning and maintenance supplies, and wipes soaked with ink as combustible
materials. Handle and dispose of properly.
●
If an Air Purifier System is installed, allow adequate space for exhaust hoses from the printer. Locate
these hoses and the Air Purifier System so that they do not pose a trip hazard or interfere with the
operation of the printer such as loading and unloading media, replacing Ink Cartridges, inspecting and
replacing the waste ink bottle.
●
Always hold the power cable by the plug when connecting and disconnecting from the power outlet.
Never pull on the cable because this may damage it and create risk of fire and electric shock.
●
Do not touch heater surfaces in the media path. This may cause burns.
In order to ensure the safe operation of the printer, heed all of the cautions and warnings contained
throughout this manual.
8 Chapter 1 Introduction ENWW
Introduction
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info