436321

HP designjet 8000s cutter blade kit Manual

16
Zoom out
Zoom in
Previous page
1/230
Next page
The front panel has the following components:
1. The Data light is off when the printer is not receiving data, and flashing when data is being received.
2. The Error light is off when there is no printer error, flashing to warn of an error condition that requires
operator intervention, and on when there is a serious internal error.
3. The Ink Cartridge light is on when all ink cartridges are present and there is sufficient ink, flashing
when an ink cartridge is low on ink, and off if an ink cartridge must be replaced.
4. The Media light indicates the status of media in the printer. When it is on, media is loaded in the printer
and off indicates that the media is not loaded.
5. The display area where information and menus are displayed.
6. The Up key
selects a menu group or moves to the previous item in a list, or increases a numerical
value. This key can also be used to rewind the media through the media path (only when the front
panel displays “Printer Ready”).
7. The Back key
selects a menu group or goes back to the previous menu. If you press it repeatedly,
or hold it down, you will soon return to the main menu.
8. The Forward key
selects a menu group or moves to the next digit when you are setting parameters.
9. The Down key
selects a menu group or moves to the next item in a list, or decreases a numerical
value. This key can also be used to feed the media through the media path (only when the front panel
displays “Printer Ready”).
10. The OK key selects an item that is currently highlighted or enters a parameter.
11. The SHIFT key is used to switch between the menu groups.
12. The Power light is off when the printer is off; green when the printer is on; flashing when the printer is
in transition between off and on.
13. The CANCEL key cancels the current operation. It is often used to stop printing the current print job.
14. The HEATER key is used to set the temperature of the front, print and rear heaters.
6 Chapter 1 Introduction ENWW
Introduction
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info