436321

HP designjet 8000s cutter blade kit Manual

17
Zoom out
Zoom in
Previous page
1/230
Next page
15. The ONLINE key switches the printer online or offline, and provides access to menu groups.
16. The Power key turns the printer on or off.
Safety precautions
The following symbols are used in this manual to ensure the proper use of the printer and to prevent the
printer from being damaged. Follow the instructions marked with these symbols.
WARNING! Failure to follow the guidelines marked with this symbol could result in serious
personal injury or death.
CAUTION Failure to follow the guidelines marked with this symbol could result in minor personal
injury or damage to the product.
General warnings
●
Use the power supply voltage specified on the nameplate. Avoid overloading the printer’s electrical
outlet with multiple devices.
●
Be sure the printer is well grounded. Failure to ground the printer may result in electrical shock, fire,
and susceptibility to electromagnetic interference.
●
Do not disassemble or repair the printer yourself. Do not reinstall the printer in a new location. Call
your local HP Service Representative for service.
●
Use only the electrical cable supplied by HP with the printer. Do not damage, cut, or repair the power
cable. A damaged power cable has risk of fire and electric shock. Replace a damaged power cable
with an HP-approved power cable.
●
Do not allow metal or liquids (except those used in HP Cleaning Kits) to touch the internal parts of the
printer. Doing so may cause fire, electric shock, or other serious hazards.
●
Power OFF the printer and unplug the power cable from the power outlet in any of the following cases:
●
When placing your hands inside the printer.
●
If there is smoke or an unusual smell coming from the printer.
●
If the printer is making an unusual noise not heard during normal operation.
●
A piece of metal or a liquid (not part of cleaning and maintenance routines) touches internal parts
of the printer.
●
During an electrical (thunder/lightning) storm.
●
During a power failure.
●
Inks used in the printer and liquids in the HP Cleaning kits contain an organic solvent (ethylene glycol
monobutyl ether acetate, CAS No. 112-07-2). Observe all local, state, and federal regulations related
to the handling, use, storage, and disposal of organic solvents.
●
Ink and fluids used in the Cleaning Kits are combustible. Do not use or store within 8 meters (25 feet)
of open flames, sparks, or other sources of ignition.
ENWW Safety precautions 7
Introduction
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info