436321

HP designjet 8000s cutter blade kit Manual

20
Zoom out
Zoom in
Previous page
1/230
Next page
●
Use only an HP Waste Ink Bottle. The bottle must be installed according to instructions or waste ink
may overflow.
An HP Waste Ink Bottle must always be installed before turning the printer ON. Automatic and manual
service cycles produce waste ink that must be contained in an HP Waste Ink Bottle.
Do not remove the cap from its tether to the HP Waste Ink Bottle. The cap is needed to properly seal
the HP Waste Ink Bottle for disposal.
Keep the HP Waste Ink Bottle upright. Do not place on tables or shelves where it could fall.
Waste ink is combustible. Keep an HP Waste Ink Bottle containing waste ink away from open flames,
sparks, or other sources of ignition.
The level in the HP Waste Ink Bottle must be checked by visual inspection to prevent overflow. If the
waste ink level is above the indication line, the bottle must be replaced with an empty HP Waste Ink
Bottle.
●
Place a sheet of paper under the HP Waste Ink Bottle on the floor when removing a bottle containing
waste ink. This will help clean up any ink spills. If soaked with ink, treat the paper as a combustible
material and dispose of properly.
●
Do not store HP Ink Cartridges in direct sunlight. Store HP Ink Cartridges in a cool, dry place. This
prevents deterioration of the ink during storage.
10 Chapter 1 Introduction ENWW
Introduction
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info