580725

Honda HF2622 Manual

11
Zoom out
Zoom in
Previous page
1/160
Next page
11 EN
Eachcuttingdeckwheelcanbefitted
at two different heights: it serves to
maintain space in the lowest posi-
tion, whereas it does not function
w
henin thehighestposition.
Tochangetheposition,unscrewend
remove the pin (1) then reposition
the wheel (2) in the upper or lower
hole of the wale shown on the dia-
gram.
T
hisworkis to bedone toall fourwheels,
WITHTHE ENGINE OFFANDTHEBLADESDISENGAGED.
Tostartcutting:
– putthe acceleratorintothe«FAST»position;
– bringthe cuttingdeckto thehighestposition;
– engagethe blades( 4.9);
– startmovingforwardsontothegrassareaverygraduallyandwith
particularcaution,aspreviouslydescribed;
– adjust theforward speed andthecutting height ( 4.6) accord-
ing to the lawn condition (height, density and dampness of the
grass).On flatground, thesegeneralconditionscanbefollowed:
High anddense grass- wetlawn 2,5 km/h
Averagecondition grass 4 ...6 km/h
Low grass -dry lawn over 6km/h
he speed is controlled in a gradual and progressive way by the
pressureonthedrivepedal.
Whencuttingonslopingground,theforward
speed must be reduced to ensure safe conditions ( 1.2 -
5.5).
In any case, the speed should always be lowered if you note a re-
ductioninenginespeed,sinceaforwardspeedthatistoofastcom-
paredtotheamountofgrassbeingcutwillnevermowthegrasswell.
Disengagethebladesandputthecuttingdeckinthehighestposition
wheneveryouneed togetpastanobstacle.
5.4.6 Emptyingthegrass-catcher
Donotletthegrass-catcherbecometoofullasthismayblockthecol-
lectorchannel.Whenthegrass-catcherisfullthereisanintermittent
audiblewarning.
Atthispoint:
– lowertheenginespeed;
– go into neutral (N) ( 4.22 or 4.32/33) and stop forward move-
ment;
– engagethe parkingbrakeonslopes;
– disengagethe blades( 4.8)andtheaudiblesignalwillstop;
Emptying the grass-catcher can onlybedone
with the blades disengaged, otherwise the engine stops.
– pulloutthelever(1)( 4.9.1)andtipupthegrass-catcherto
emptyit;
– closeupthe grass-catcher sothatithooks ontothe pawl stop
(2)and putthelever(1)backintoplace.
NOTE
HF2•••
◊
B• HF2•••HM•
WARNING!
HF2•••H
♦
•
WARNING!
The pedal has to be released gradually
as a sudden engagement may cause tipping up and loss
of control ofthe vehicle.
Graduallyreachthedesiredoperatingspeedusingtheaccelera-
t
or andgear lever.Tochange thegearspeed theclutch mustbe
usedpushingthepedaldownhalfway ( 4.21).
Putthe acceleratorleverinamidwaypositionbetween«SLOW»
and«FAST».
Disengage the parking brake and release the brake pedal
(
4.31).
Press the drive pedal forward ( 4.32) and go to the required
speed bygradually increasing pressure onthepedal andpress-
ingthe acceleratorappropriately.
Drivemustbeengagedinthewayalready
described ( 4.32)to preventsudden engagementfrom
causing tipping up andloss ofcontrolof thevehicle, par-
ticularly onslopes.
5.4.3 Braking
First,reducethemachine’sspeedbyreducingtheengine’sr.p.m.and
then push the brake pedal ( 4.21 or 4.31) to further reduce the
speeduntil themachinestops.
The machinealreadyslowsdownconsiderably
by just releasing the drive pedal in forward or reverse.
5.4.4 Reverse
ReversemustbeengagedONLYwhenthemachineisstopped.
Pushdownthe pedaluntil themachinestopsand theninsert re-
versebymovingtheleversidewaysandputtingitintoposition«R»
( 4.22).Gradually release the pedaltoengage the clutch and
thenbegin movinginreverse.
When the machine is stopped, start the reverse movement by
pressingthedrivepedalinthe«R»direction( 4.33).
5.4.5 Grass-cutting
When youhave reached theareatobe mowed,makesure thatthe
grass-catcherorstone-guardispositionedcorrectly.
Thecuttingdeckwheels(1)areincludedsothataspaceisalways
keptbetweenthegroundandtheedgeofthecuttingdecktopre-
ventthelawndamageifthegroundisuneven.
HF24••
◊
•• HF26••
◊
••
WARNING!
HF2•••H
♦
•
HF2315SB•
NOTE
HF2•••H
♦
•
WARNING!
HF2•••H
♦
•
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

honda-hf2622

Reset search

  • I hit a log with my cutting blade and one side is not engaging while the other side is still working do you have a sugestion regarding which part needs replacing,,is there a sheer bolt or similar that needs replacing on my honda HF2622 Sit on mower Submitted on 12-8-2023 at 10:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HF2622 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HF2622 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 11,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info