Manual Honda HF2622 (page 10 of 160) (English, German, Dutch, French, Italian, Spanish)

580725

Zoom out

Zoom in

1/160

10EN

Wear heavy gloves when handling the

blades.

Disengage drive to attachments, stop the en-

gineand removethe ignitionkey beforecleaning, checking or

workingonthemachine.

5.4 USINGTHEMACHINE

5.4.1 Starting

Allstartingoperationshavetobeeffectedin

an open or well-ventilated area! ALWAYS REMEMBERTHAT

HE ENGINE’S EXHAUST FUMESARETOXIC!

Tostarttheengine:

– engagethe parkingbrake( 4.5), onslopingground;

– putthe transmissionintoneutral(«N»)( 4.22or4.32/33);

– disengagethe blades( 4.8);

– ifstartedcold, usethechoke( 4.2);

– position the accelerator lever ( 4.3) between «SLOW» and

«FAST»;

– putinthekey( 4.4),andturnto«ON»tomakeelectricalcontact,

thenturnto«START»tostarttheengine;

– releasethekeyonce theenginehasstarted.

Whentheenginehasstarted,puttheacceleratorinthe«SLOW»po-

sitionand closethechoke(if fitted).

The chokemust be closed assoon asthe engine

is running smoothly.Using it when the engine is already warm can

foul the spark plug and cause the engine to run erratically.

Should you have difficulties instarting do notper-

sist withusing the startermotor as this can rundown thebattery or

flood the engine.Turn the key to the «OFF» position, wait for a few

seconds andthenrepeat the operation.Shouldthemalfunction per-

sist, refer to chapter «7» of this manual.

Always bear in mind that the safety devices pre-

vent the engine starting when:

– the blades are engaged;

– the transmission is not in neutral («N»).

– the operator is absent with the parking brake disengaged.

Inthesecases,oncethesituationhasbeencorrected,the keymust

first be turned back to «OFF» before the engine can be restarted.

5.4.2 Forwarddrive andmoving withoutmowing

Thismachinehasnotbeenapprovedforuse

on public roads.It has tobe used(as indicated by the High-

way Code) in private areas closed to traffic.

When moving the machine, the blades must be

disengaged and the cutting deck put at its highest position (posi-

tion «7»).

Puttheacceleratorcontrolbetweenthe«SLOW»and«FAST»po-

sitions, and the gear change lever in the 1st speed position

( 4.22).

Keepthe pedal presseddownanddisengagetheparkingbrake.

Slowlyreleasethepedalwhichwillturnfrom«brake»to«clutch»,

thusoperatingtherearwheels( 4.21).

HF2315SB•

WARNING!

NOTE

WARNING!

IMPORTANT

NOTE

IMPORTANT

DANGER!

Donot usemixturescontainingmore than10%ethanol,or fuelcon-

taining methanol (methyl orwoodalcohol),which do not containco-

solvents, or corrosion inhibitors for methanol.

In the case of a mixture containing methanol with addition of co-

olvents and corrosion inhibitors, limit the proportion to 5% of

methanol.

The guarantee does not cover damage caused to the fuel system

or engine performance problems resulting from the use of fuel

containing alcohol. Honda does not give its approval to the use of

fuels containing methyl alcohol since their suitability is not yet

proven.

.3.4 Checkingthebraking system

Make sure that the machine’s braking capacity is adequate for the

conditionsofusage.Avoidstartingthemachineifyouhavedoubtson

thebrakeefficiency.If necessary, adjustthe brake( 6.3.4).Ifyou

stillhavedoubtsaboutitsefficiency,contact yourDealer.

5.3.5 Fitting theprotectiondevicesat theexit

(grass-catcheror stone-guard)

Neveruse themachinewithout having fitted

the protection devices atthe exit!

Theprotectiondevicesmustbefittedwiththetipping leverslow-

ered.

Attachthegrass-catcherinsertingtheup-

pertubeofthe frame intotheslotsofthe

2brackets(1).

Tocentrethegrass-catchercorrectly,align

thetwosymbolsonthegrass-catcherand

onthe backplate

Makesurethatthelowertubeoftheopen-

ing of the grass-catcher hooks onto the

pawl(2).

Ifthehookistoostiffortooloose,adjust

thereturnspring(

6.3.6).

Ifyouwouldliketomowwithoutusingthe

grass-catcher,anoptionalstone-guardkit

( 9.2)isavailableonrequest.Thishas

to be attached to the rear plate as indi-

catedin therelevantinstructions.

5.3.6 Checking theeffectivenessofthe safety devices

Checkthatthesafetysystemsareworkingproperlybysimulatingthe

varioussituations ofusage listed( 5.2) andmakingsurethat the

indicatedresultisachievedforeachsituation.

5.3.7 Checkingtheblades

Checkthatthebladesaresharpenedproperlyandfirmlyfixedtotheir

hubs.

– A badlysharpened bladepulls atthegrass and causesthelawn

toturnyellow.

– A looseblade causes unusualvibrations andcan be dangerous.

HF2•••HT•

WARNING!

I hit a log with my cutting blade and one side is not engaging while the other side is still working do you have a sugestion regarding which part needs replacing,,is there a sheer bolt or similar that needs replacing on my honda HF2622 Sit on mower Submitted on 12-8-2023 at 10:53
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honda HF2622 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 11,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honda HF2622 Manual

Product: